Pistol Stabilizers are BACK! | Federal Judge Blocks Nationwide Enforcement of the Pistol Brace Rule

Last Wednesday, Judge Matthew Kacsmaryk of the United States District Court in the Northern District of Texas granted injunction relief (an injunction) to prevent the ATF from enforcing the ATF’s Factoring Criteria for Firearms with Attached Stabilizing Braces rule-nationwide. What does this mean? In short, as far as pistol braces go, we’re back to 2021.

To obtain this injunction, the plaintiffs needed to satisfy four rules:

  1. They must be likely to prevail on the merits.
  2. They would suffer irreparable harm if denied.
  3. The injury outweighs any harm that would be caused if the injunction is granted.
  4. The public interest supports relief.

Judge Kacsmaryk also noted that the rule would cause horrendous strain on companies who produce stabilizing braces. “Additionally, ATF admits the 10-year cost of the Rule is over one billion dollars,” he wrote. “And because of the Rule, certain manufacturers that obtain most of their sales from stabilizing braces risk having to close their doors for good.” Here at Shockwave, we are very thankful for all the support our customers and 2nd amendment organizations have provided to help keep the fight going. We wouldn’t still be here without you.

In the ruling Judge Kacsmaryk stated,“[T]he Court is certainly sympathetic to ATF’s concerns over public safety in the wake of tragic mass shootings. The Rule ’embodies salutary policy goals meant to protect vulnerable people in our society,’” Judge Kacsmaryk wrote in Britto v. ATF. “But public safety concerns must be addressed in ways that are lawful. This Rule is not.”

There are two main items he noted in his ruling for injunctive relief:

  1. The ATF did not follow the Administrative Procedures Act (APA).  

He wrote, ‘[t]he controlling law of this case is that the Government Defendants’ promulgation of the Final Rule ‘fails the logical-outgrowth test and violates the APA’ and ‘therefore must be set aside as unlawful’ under the APA,’”

  • The ATF is violating the 2nd Amendment.

He added,“Absent injunctive relief, the Final Rule will impair and threaten to deprive them of their fundamental right to keep and bear commonly used arms as a means of achieving the inherently lawful ends of self-defense. See U.S. CONST. AMEND. II (providing that the ‘right of the people to keep and bear Arms, shall not be infringed.’).”

Here at Shockwave we worked tirelessly with U.S. Congressman Bilirakis, U.S. Congresswoman Anna Paulina Luna, and U.S. Senator Rick Scott to help overturn this rule through the power of the vote. While it won in the House, it did fail in the Senate.  So, it was back to the courts to help stop this overreach. Throughout the recent months there have been many injunctions set in place for Gun Owners of America, Second Amendment Foundation, FPC, and more. However, in order to be protected you would have needed to be named plaintiff or a member of one of these originations. With this new nationwide injunction from Judge Kasmaryk, that is no longer the case. All Americans are protected.

 

We are very thankful for all the hard work these 2nd amendment organizations do to help support companies like us and law abiding citizens who enjoy their 2nd amendment rights. So where do we go from here? Most certainly the Justice Department will appeal this ruling to the 5th Circuit Court of Appeals. The consensus among the legal community is that they will support the injunction relief and issue a permanent injunction in the coming months. As to the various lawsuits themselves? These will be a long endeavor and will likely take years to work through the legal system. Eventually, the U.S. Supreme Court will probably hear them. In the meantime, Americans will be protected by the injunctions.

Shockwave offers four different pistol stabilizers.

Pistol stabilizers improve the shooter’s safety and accuracy as the AR pistol is stabilized on their forearm for support.

Blade Stealth

Blade Classic

Blade 2M

Blade Pistol Stabilizer 

Shockwave Blade Classic and Blade Stealth Now Available in All Colors

The Shockwave Blade Stealth and Shockwave Blade Classic now come in all available colors — Black, FDE, OD Green, and Gray. 

These four colors of the Shockwave Blade are Made in America and allow you to customize your firearm to fit your personal style. 

 

Learn more about each Shockwave Blade® below:

 

Blade® Classic

shockwave blade classic

The veteran-designed Shockwave Blade® Classic pistol stabilizer is slightly smaller than the traditional Shockwave Blade®. 



Blade® Stealth

shockwave blade stealth

The Shockwave Blade® Stealth pistol stabilizer has a slick look and slightly smaller profile, making it an extremely comfortable brace for any user.

 

Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

  • Available in Black, FDE, OD Green, and Gray
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • Manufactured to exacting tolerances
  • Adjustable with a simple pull mechanism
  • Fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. 
  • Made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the simple, vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.

How to Build an AR-15 & What You Need to Know

Disclaimer: This blog is for educational purposes only and not intended to provide legal advice. You are responsible for your own actions, and we advise you to seek guidance from a legal professional in your area before building a custom AR-15 pistol.

 

Should you be afraid to build your own AR pistol?

 

Lions, tigers, and custom-built AR pistols. Oh my!

 

As a law-abiding citizen, we understand that building your own AR pistol can feel like walking on eggshells. It’s one thing to learn how to safely make a firearm that will work great for your needs—and quite another when it comes to building it according to all the convoluted rules in place. 

 

Have no fear. We will walk you through the steps of what you need to get started.

 

What you need to know before building an AR-15 pistol

 

The fears behind building a custom AR-15 pistol are not primarily focused on preventing yourself from getting caught in the act of using an illegally configured firearm at the range—but more about protecting yourself in case you ever need to use it in a personal defense situation, where your firearm can be seized and used as evidence against you in court. 


For rest assurance (and to remain the law-abiding citizen we know you are), building a firearm legally is truly a “cover your ass” action that calls for getting it done right the first time. It’s not worth cutting corners that could cost you a whole lot of issues in unexpected circumstances. 

 

Before we get into the nitty gritty, let’s cover our bases.

 

The first thing you want to do is familiarize yourself with both your local and state gun regulations, or contact your local FFL dealer for guidance. They can help answer questions and provide suggestions as well.

 

Now let’s define what a pistol is on a federal level.

 

The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) defines a pistol as “a weapon originally designed, made and intended to fire a projectile from one or more barrels when held in one hand and having: a chamber as an integral part of, or permanently aligned with, the bore; and a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore.”

 

While an AR-15 pistol has a similar makeup as an AR-15 rifle, there are a few differences that classify it a “pistol”: 

  • The barrel is typically shorter than 16 inches (and overall length is shorter than 26 inches).
  • You can’t put a vertical forend grip on it (angled grips are okay).
  • You can optionally have a pistol brace on your firearm.
  • It cannot have a stock.

 

Also, the NFA (National Firearms Act) doesn’t regulate pistol barrel length. So as long as it doesn’t have a stock, which would classify it as a rifle, you should be good to go without having to deal with the tax stamps, paperwork, and other rules from the NFA.



How to build an AR-15 pistol

how to build an ar-15 pistol

Now let’s get to the good stuff: building a custom AR-15 pistol. 

 

The benefit of building an AR-15 pistol is that you get exactly what you want–sometimes at a fraction of the cost. As long as you have the time on your hands, it can be a great alternative to buying one from a firearms dealer. 

 

First things first, you need to define your budget and what you want from your firearm.

 

Now it’s time to get a lower and upper receiver from your FFL. Ensure the 4473 form is marked “Other receiver, other firearm and receiver (not rifle).” You must know how the lower receiver part was purchased. If it was originally built as a rifle, it can’t be built into a pistol without getting a tax stamp and registering it with the ATF. But if you bought a stripped lower receiver and built it into a pistol from scratch (and it’s not designated as a rifle on the 4473 form), you’re gravy.

 

Here are some other items you’ll need:



  • Handguard
    • A handguard (also known as a forend or forearm) is a shroud that covers the barrel, preventing accidental burns and allowing a second surface for gripping the firearm. There are free-floating and drop-in handguards available based on your needs.



  • Bolt Carrier Group (BCG)
    • This is something you don’t want to go cheap on. It’s the part of the rifle or pistol that allows for safe semi-automatic action.


  • Barrel
    • You need to determine which caliber you want: .223/5.56mm, .300 Blackout, 9mm, .45 ACP, etc.
    • You will want to ensure the barrel’s gas port is in the desired location: carbine or rifle. Carbine-length gas systems are the de facto standard for most pistol builds these days.
    • An AR-15 pistol also usually has a barrel shorter than 16” (the minimum legal length for a rifle barrel).



  • Trigger
    • You can stick with a standard mil-spec trigger or consider an aftermarket trigger. The sky’s the limit when it comes to function and features of the myriad aftermarket triggers.





  • Pistol buffer
    • A pistol buffer is another piece designed to help make your AR semi automatic. Example of an AR-15 carbine buffer:



  • Buffer spring
  • Castle nut
    • A castle nut (or buffer tube nut) screws into the buffer tube and keeps the buffer tube/receiver extension and lower receiver end plate secured. Example of an AR-15 castle nut:
  • Endplate
    • An endplate is designed for an AR-15 with a carbine buffer tube, aligning the buffer tube with the lower receiver. Example of an AR-15 endplate:



 

Other add-ons we suggest:



  • Optics
    • We could write an entire book on optics and sights. Suffice it to say, do some independent research, ask others, and try out different options for yourself. First and foremost, you will need to determine whether open sights, a red-dot-type, a telescopic optic—or a combination thereof is what you’re looking for.



  • Flashlight for home defense
    • A flashlight mounted to your firearm will help you see where you’re going during the night and see your target, but a bright light can also stun your intruder, making it difficult for them to see you. 

Learn About the New Shockwave Blade Classic & Blade Stealth

Unsatisfied with the current pistol stabilizer options on the market, Shockwave Technologies released the game-changing Blade pistol stabilizer back in 2015. Since then, our products have only gotten better. 

 

As the Blade enthusiast population has rapidly grown the past several years, dealers, firearm manufacturers and DIY gun builders interested in pistol stabilizers have grown right there with it. This demand has allowed Shockwave to continue making advancements to these products to create the best-in-class pistol stabilizers on the market.

 

In 2020, Shockwave is excited to announce the all new Blade Classic and Blade Stealth.

 

Blade® Classic

shockwave blade classic pistol stabilizer

The new, veteran-designed Shockwave Blade® Classic pistol stabilizer takes a slightly smaller traditional and signature Shockwave Blade® look with all the new desired features. 

 

The Blade Classic pistol stabilizer is manufactured to exacting tolerances, adjustable with a simple pull mechanism, and fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. It’s made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  








Blade® Stealth

shockwave blade stealth pistol stabilizer

The Shockwave Blade® Stealth pistol stabilizer is our latest creation. The new slick look and slightly smaller profile makes it an extremely comfortable brace for any user. The Blade Stealth is adjustable with a simple pull mechanism. 

 

Just like the Blade Classic, it’s also made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel is not included) and fits all pistols equipped with a Mi-spec buffer tube.

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.



Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

 

  • Available in Black (coming soon in FDE, ODG, and Gray)
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.



For dealer orders or packages please contact us at:

 

https://shockwavetechnologies.com/ffl-dealer-packages 

sales@shockwavetechnologies.com 

727-877-8277

How the Shockwave ZMAG™ 30 Fixed Zytel Magazine Issues

The Big 80s Were Great! 80s Plastics Technology? Not So Much.

 

 

The Issues with Zytel Magazines

 

Nearly as much as has been written about the issues regarding Zytel magazines for the M-11/NINE guns as the guns themselves. The main criticisms were primarily that the plastic feedlips would wear out prematurely, leading to feeding unreliability, and that the magazine bodies would sometimes split open, which would add to feeding issues — or simply dump your ammo all over the ground.

 

The springs in Zytel magazines also tended to be quite weak. The springs lacked the strength necessary to tightly push the bullets up against the feedlips, which all too often led to cartridges “nosing down” into the magazine body and causing a jam.



That’s When Shockwave Stepped In

Shockwave ZMAG 30

All these issues with the Zytel magazines created a demand for a better-designed magazine. That’s when Shockwave Technologies entered the picture for MAC owners. Working with a team of American engineers who had decades of experience in sheetmetal stamping, we designed, prototyped, tested, and—in 2014—began manufacturing and selling our ZMAG 30. The 50-round version—the ZMAG 50—followed several months later.

 

Shockwave’s ZMAGs are the perfect upgrade to liven up your M-11/NINE pistols and submachine guns. They’re designed to last generations with their durable steel construction, feed flawlessly with their polymer followers and dependable Wolff springs, and look attractive all the while with their gorgeous Cerakote finish. The ZMAGs also feature witness holes, so you can see at a glance how many rounds you have on tap at any time.

 

Strong, lightweight, easy to load, and simple to disassemble, Shockwave ZMAGs are the last word in M11/NINE magazines.




Back-in-Stock Alert: Shockwave ZMAG™ 30

 

The metal 30-round Shockwave ZMAG for the Cobray M-11 (9mm and .380) is back in stock! Its 8.2 ounce weight and unbeatable design make it head and shoulders above competition.

 

Shockwave ZMAG 30 features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs using these very handy loaders.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come.

 

The Shockwave ZMAG 30 fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

 

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

*ZMAGs are not available for sale in the following states/areas: CA, CO, CT, MA, MD, NJ, NY, and Chicago*

Why You Should Choose an AR-15 Pistol for a Home Defense Firearm

Let’s cut to the chase: The AR-15 pistol is one of the best firearms for home defense. 

 

Why? They’re affordable, reliable, accurate, and found everywhere. It’s no wonder the AR-15 is informally known as America’s 21st Century musket. And for good reason. 

 

When an intruder sees the easily recognized AR in your hands, they know you mean business. 

 

Learn about the evolution of the AR and AR pistol

 

But first, let’s dive into the benefits of using an AR-15 pistol for home defense. Each benefit is like a ripple effect — they all go hand in hand to make this firearm perfect for defense purposes. 



Benefits of an AR-15 Pistol for Home Defense

 

shockwave blade stealth ar-15 pistol

Affordable

 

You can find an AR-15 pistol to fit every budget: from just a few hundred dollars to the “sky is the limit.” The typical .223 ammunition is easily found in stores (when there’s not a global pandemic unfolding daily or nightly riots) and one of the least expensive ammos, with prices averaging about 32 cents per round. 

 

 

Low Recoiling

 

A low recoil makes the AR-15 pistol easy to shoot and a good option for beginners — even younger members of the family.

 

 

Accuracy

 

Because of such low recoil, accuracy is improved for most shooters.

 

 

Lightweight

 

At a mere 6 pounds — with ammo! — the AR-15 pistol is light enough for shooters of all ages and experiences. Because it has such a lightweight body, you can easily customize and add accessories to your firearm without making it too heavy to handle safely and accurately — especially in a home defense scenario. 

 

 

Ergonomically Designed

 

Many features of the AR-15 pistol are designed with ergonomics in mind, making this firearm comfortable and safe to shoot: pistol grip, trigger reach, safety location, forward handguard, sights, etc.

 

 

Ammo Capacity

 

A typical AR-15 pistol magazine holds 30 rounds of ammo. 

 

Many experts recommend using the .223 cartridge because it’s typically easy to find in stores,  inexpensive, and provides lower recoil. Some recommend using a 55-grain soft-point load that minimizes bullet penetration, which can be beneficial to protect your family in other parts of the home (or surrounding neighbors) in case the bullet misses the intended target. However, as you may know, the AR-15 is available in a multitude of calibers.

 

 

Size

 

During a home invasion, you don’t want to be turning corners and allow the intruder to discover your location before you know theirs. The AR-15 pistol is a great option for home defense due to its relatively short length, allowing you to turn corners discreetly and avoid disclosing your location that can put your defense game at risk. 

 

 

Customizable

 

From function to ergonomics to aesthetics, there are simply too many types of firearm accessories for customizing your AR-15 pistol than we can possibly cover here: grips, forearms, slings, sights, lights, lasers, scopes, red dot sights, triggers, muzzle devices, and so on. 

 

For home defense purposes, however, we recommend keeping it simple. Focus on the following accessories:

  • Brace, grip and/or sling: for better and safer control of your firearm
  • Flashlight: for better visibility in low-light conditions and stunning any intruders with the bright illumination
  • Red dot sight: for accuracy



A note about pistol braces:

 

Whether you’re building a custom AR-15 pistol or bought an AR-15 pistol without a brace, adding a brace can improve control and accuracy.

 

An AR-15 pistol cannot have a stock but it can have a brace, such as the Shockwave Blade and Shockwave Blade 2M. 





Shockwave AR-15 Pistol Accessories

 

Shockwave Technologies offers products to enhance your home defense use (and enjoyment) of your AR-15 firearms. Check out these Shockwave products compatible with AR-15 pistols.

 

 

Blade®

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 

 

 

Blade® 2M

 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 

Which Firearms are Compatible with Shockwave?

What makes Shockwave™ Technologies’ line of products so great is not only the unparalleled quality of the items, but that they’re also Made in America and veteran designed, engineered, marketed, and sold. Check out some of our popular product lines at Shockwave Technologies and experience the difference yourself. Find out which firearms are compatible with Shockwave below.

 

Shockwave™ Raptor™ Product Line

 

Raptor™ Grip 

Shockwave raptor grip
The unique angle of the Raptor™ Grip minimizes felt recoil, allowing maximum control shot after shot. Paired with the Raptor F1™ Forend, you gain a great hold on your firearm with their enhanced texture. The glass-filled polymer construction is virtually indestructible.The Raptor™ Grip is compatible with both 12-gauge and 20-gauge firearms with 18.5”, 20”, and longer barrels.

 

Our Raptor™ Grip 500/590 is compatible with:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20 gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

Our Raptor™ Grip 870 and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump 12-gauge
  • Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

Our Raptor Grip 870 for 20-gauge and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump 20-gauge
  • Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Our Raptor™ Grip 500E is compatible with:

  • Mossberg 500E .410 gauge firearms 
  • Mossberg 590E .410 gauge firearms



Raptor™ F1 Forend

Raptor™ F1 Forend
The cutting-edge design of the Shockwave Raptor™ F1 forend meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend.

 

Compatible with:

  • Mossberg 500 12-gauge
  • Mossberg 590 12-gauge
  • Mossberg 590 Shockwave 12-gauge
  • Remington 870 12-gauge
  • Remington Tac 14 12-gauge

 

Features include:

  • A total of 10 M-LOK® slots for mounting lights,vertical grips, angled grips, Picatinny rails, and more
  • The optional upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • Veteran designed



Raptor™ Forend Tool

Raptor™ Forend Tool

If you’ve ever tried to remove or install a forend nut on a pump-action shotgun, you know how frustrating that can be — and the potential damage to your gun. Whether the nut protrudes or is recessed, and no matter how long your magazine tube, you can now quickly and easily reach it. The nut tool works for all forends including the Streamlight TL-Racker forend. Replace your forend in under two minutes.

 

The Shockwave Technologies Raptor™ Forend Nut tool is made for Mossberg 500/590 and Remington 870 Forends. One side fits Mossberg 500/590, and the other Remington 870 and Hawk 982 12-gauge firearms.





Raptor™ Strap Kit

Raptor™ Strap Kit

The Raptor™ Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. It’s easy and quick to install in about 10 minutes. And it improves handling immensely!

 

The Raptor™ Strap is designed for the tactical forearm, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor™ Strap kit is compatible with:

  • Mossberg 500 forends
  • Mossberg 590 forends
  • Remington 870 forends
  • Magpul forends
  • Shockwave Raptor F1™ forends






Shockwave Blade® Product Line



Blade® 

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 








Blade® 2M 

Shockwave Blade® 2M 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 





Shockwave ZMAG™ Product Line

 

30 Round ZMAG™ and 50 Round ZMAG™

30 Round ZMAG™ and 50 Round ZMAG™

The design of the all-metal 30-round Shockwave ZMAG™ and 50-round Shockwave ZMAG™  for the Cobray/SWD M-11 (9mm and .380) is head and shoulders above the competition. 

 

The Shockwave ZMAG™ fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

Some exclusive features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch hole.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come. 

The Evolution of the AR and AR Pistol

What is an AR pistol?

AR pistol Shockwave

While an AR-15 pistol has a similar makeup as an AR-15 rifle, there are a few differences that classify it a “pistol.” To be exact, the barrel’s typically shorter than 16 inches, you can’t put a vertical forend grip on it, and you can optionally have a pistol brace on your firearm. 

 

 

Why would you want an AR pistol? 

 

Gun enthusiasts love shooting semi-automatic AR pistols for entertainment and target practice, but it can also be a great firearm for personal and home defense. However, many gun owners prefer a shotgun or a Mossberg 590 Shockwave for home defense.

 

Modern AR firearms are lightweight, durable, and easy to use. As long as it adheres to gun laws, AR owners can also customize their firearm how they see fit—from color choices to barrel lengths and accessories.

 

 

Evolution of the AR:

 

There’s a bit of history to tap into when it comes to understanding how the AR pistol became such a hit. Many consider AR firearms “American.” But looking into the subject deeper, its roots actually go back to the M1 Garand, which was a rifle designed by a French-Canadian. An unlikely candidate, eh? Back in the 1930s, John Garand was hired by the U.S. Springfield Armory to design guns. His .30-06 caliber, gas-operated, semi-automatic rifle was eventually adopted as the official U.S. infantry rifle used in action — including WWII and the Korean War. By 1938, the M1 Garand was mass produced and delivered to the Army for battle. After WWII, most M1 Garand rifles were put away into storage or loaned to allies fighting in battles, but as new wars sprouted (including when North Korea attacked South Korea in 1950), the M1 Garand started going back into production until 1957. 

 

But things started to shift in the 1950s when the AR-10 was born. Eugene Stoner, a former Marine and Army Ordnance technician, helped design that firearm out of aircraft-grade aluminum, allowing for a mere 7- to 9-pound weapon that would be beneficial for soldiers constantly carrying around their firearm for protection and battle. This new infantry rifle design also had a larger capacity magazine and select-fire capability. 

 

Despite popular belief, the “AR” stands for ArmaLite Rifle, not “assault rifle” or “automatic rifle.” ArmaLite is a firearms engineering company based out of California and where the AR-10 name derives. This firearm was built as a magazine-fed, gas-operated rifle firing a 7.62mm bullet. By 1960, a scaled-down version, firing the 5.56mm cartridge, started making its way through the military world. However, ArmaLite’s lack of successful firearm sales led them to sell the design to Colt’s Manufacturing Company, and the U.S. Military hired Colt to start pushing out loads of a full-auto version, designated the M16, to soldiers fighting in Vietnam. 

 

Not long after, Colt released a semi-automatic AR-15 version—the SP1—to the public for purchase, and sales have continued to boom. Today, there are millions of Americans who own AR-15s and there are over 150 manufacturers of AR parts. 

 

Because of the continued popularity of the AR firearm in households, many manufacturers, sellers, and even gun owners are influencing the evolution of the AR. 

 

Several years ago, the creator of the Shockwave Blade was inspired to create a smaller, lighter, more-affordable pistol brace. The Shockwave Blade® Pistol Stabilizer is veteran designed, engineered, marketed, and sold in the U.S. It’s made from high-strength glass-reinforced polymer, manufactured to exacting tolerances, and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation. The Blade 2M, Shockwave’s newest Brace, is designed to fit any standard mil-spec carbine buffer tube and adjusts with a simple trigger lever.

 

Shockwave’s pistol blade stabilizer is also ATF approved for pistol use. Although it’s illegal (and a felony) to have a stock on an AR pistol function without ATF approval and a tax stamp, there are many foreign firearm sellers online trying to scam gun owners into buying illegally produced products and fakes. When you buy directly from Shockwave, you can ensure to receive American-made, ATF-approved products for your firearm.



 

What are the laws of owning an AR pistol?

 

Before we get into the nitty gritty of gun laws, you should refer to your official state and local gun laws for legal advice. You can also contact the ATF (Bureau of Alcohol, Tobacco, Firearms and Explosives) for more information about the AR pistol.

 

But for general info about this firearm, keep reading.

 

Most states allow you to own an AR pistol. But again, it’s important that you confirm your state and local laws to ensure you can own one before you start pulling out your wallet. Illegally owning an AR in areas where it’s prohibited could cost you more than your hard-earned money — it could cost you your freedom. 

As previously mentioned, there are a few rules that qualify an AR pistol barrel for legal ownership. The barrel can be shorter than 16 inches, you can’t have a vertical foregrip (it can be a handstop or angled foregrip), and you can have a pistol brace on your firearm to comply with AR gun ownership laws. The ATF does pay attention to the general length of an entire firearm, too. If a firearm is over 26 inches long with a barrel shorter than 16 inches long, it can have a vertical foregrip (but not a rifle stock).