Pistol Stabilizers are BACK! | Federal Judge Blocks Nationwide Enforcement of the Pistol Brace Rule

Last Wednesday, Judge Matthew Kacsmaryk of the United States District Court in the Northern District of Texas granted injunction relief (an injunction) to prevent the ATF from enforcing the ATF’s Factoring Criteria for Firearms with Attached Stabilizing Braces rule-nationwide. What does this mean? In short, as far as pistol braces go, we’re back to 2021.

To obtain this injunction, the plaintiffs needed to satisfy four rules:

  1. They must be likely to prevail on the merits.
  2. They would suffer irreparable harm if denied.
  3. The injury outweighs any harm that would be caused if the injunction is granted.
  4. The public interest supports relief.

Judge Kacsmaryk also noted that the rule would cause horrendous strain on companies who produce stabilizing braces. “Additionally, ATF admits the 10-year cost of the Rule is over one billion dollars,” he wrote. “And because of the Rule, certain manufacturers that obtain most of their sales from stabilizing braces risk having to close their doors for good.” Here at Shockwave, we are very thankful for all the support our customers and 2nd amendment organizations have provided to help keep the fight going. We wouldn’t still be here without you.

In the ruling Judge Kacsmaryk stated,“[T]he Court is certainly sympathetic to ATF’s concerns over public safety in the wake of tragic mass shootings. The Rule ’embodies salutary policy goals meant to protect vulnerable people in our society,’” Judge Kacsmaryk wrote in Britto v. ATF. “But public safety concerns must be addressed in ways that are lawful. This Rule is not.”

There are two main items he noted in his ruling for injunctive relief:

  1. The ATF did not follow the Administrative Procedures Act (APA).  

He wrote, ‘[t]he controlling law of this case is that the Government Defendants’ promulgation of the Final Rule ‘fails the logical-outgrowth test and violates the APA’ and ‘therefore must be set aside as unlawful’ under the APA,’”

  • The ATF is violating the 2nd Amendment.

He added,“Absent injunctive relief, the Final Rule will impair and threaten to deprive them of their fundamental right to keep and bear commonly used arms as a means of achieving the inherently lawful ends of self-defense. See U.S. CONST. AMEND. II (providing that the ‘right of the people to keep and bear Arms, shall not be infringed.’).”

Here at Shockwave we worked tirelessly with U.S. Congressman Bilirakis, U.S. Congresswoman Anna Paulina Luna, and U.S. Senator Rick Scott to help overturn this rule through the power of the vote. While it won in the House, it did fail in the Senate.  So, it was back to the courts to help stop this overreach. Throughout the recent months there have been many injunctions set in place for Gun Owners of America, Second Amendment Foundation, FPC, and more. However, in order to be protected you would have needed to be named plaintiff or a member of one of these originations. With this new nationwide injunction from Judge Kasmaryk, that is no longer the case. All Americans are protected.

 

We are very thankful for all the hard work these 2nd amendment organizations do to help support companies like us and law abiding citizens who enjoy their 2nd amendment rights. So where do we go from here? Most certainly the Justice Department will appeal this ruling to the 5th Circuit Court of Appeals. The consensus among the legal community is that they will support the injunction relief and issue a permanent injunction in the coming months. As to the various lawsuits themselves? These will be a long endeavor and will likely take years to work through the legal system. Eventually, the U.S. Supreme Court will probably hear them. In the meantime, Americans will be protected by the injunctions.

Shockwave offers four different pistol stabilizers.

Pistol stabilizers improve the shooter’s safety and accuracy as the AR pistol is stabilized on their forearm for support.

Blade Stealth

Blade Classic

Blade 2M

Blade Pistol Stabilizer 

Gun Range Etiquette: Tips for a Better Outing at an Indoor Range with Your AR-15

When it comes to indoor shooting range etiquette, some things are black-and-white — while others are a bit gray. Here’s one example: 

Should you shoot your short-barreled AR-15 at an indoor range?

Short answer: 

Yes, but we recommend adding a Flash Forward™ muzzle device (aka Not a Silencer™) if you want to be considerate of those around you! 

Longer answer:

The newest Shockwave™ Technologies Flash Forward™ muzzle devices are specifically designed to redirect the expanding gasses at the muzzle of your firearm away from you and toward the target. 

Adding a Flash Forward™ muzzle device will not only help protect your hearing, but it will also reduce the noise your neighbors at the range are subjected to. Legally. Remember, a short barrel doesn’t have time to burn all the powder in most 5.56mm cartridges. Meaning, much of that powder gets burned in front of the muzzle, which can make short-barreled ARs unpleasant for everyone concerned.

You can also add one of these bad boys without a $200 NFA tax stamp. Because they are Not a Silencer™.

At Shockwave Technologies, we offer this must-have product for four different types of calibers. The first product is for the .22lr-caliber Ruger 10/22 rifle, and the other three products are for AR-15 firearms in .30 Caliber/.300 Blackout, 5.56mm, and 9mm calibers. 

 

Introducing: 4 Different Shockwave Flash Forwards™

shockwave flash forward

In testing, we have seen the peak decibel reading at the shooter’s ear reduced by an average of the following decibels (db):

  • Shockwave Flash Forward™ MK1 MOD 0: 5.3 db

    This hard-anodized, 6061-T6 aluminum “can” mounts directly to your factory unthreaded muzzle. No need for adapters. For a semi-permanent installation, be sure to use the included roll pin.

 

  • Flash Forward™ MK 1 MOD 1: 9.8 db

    This hard-anodized, 6061-T6 aluminum “can” mounts directly to your 5/8”-24 threaded muzzle. No need for shims or crush washers. For a semi-permanent installation, a bit of blue thread-locking compound works well.

 

  • Flash Forward™ MK 1 MOD 2: 10.1 db

    This hard-anodized, 6061-T6 aluminum “can” mounts directly to your ½”-28 threaded muzzle. No need for shims or crush washers, though you can still use them if you wish. For a semi-permanent installation, a bit of blue thread-locking compound works well.

 

  • Flash Forward™ MK 1 MOD 3: 9.4 db

    This hard-anodized, 6061-T6 aluminum “can” mounts directly to your ½”-36 threaded muzzle. No need for shims or crush washers, though you can still use them if you wish. For a semi-permanent installation, a bit of blue thread-locking compound works well.

    As the decibel is logarithmic, this is a very noticeable difference.

    However, because the overall sound level isn’t affected — just redirected — the Flash Forward isn’t considered an NFA item. It’s classified as a simple “threaded muzzle device.”

    Please note that OSHA’s “hearing safe” threshold is 140 dB. The Flash Forward is not an approved hearing-safe suppressor. Please always wear hearing protection, such as OSHA-approved ear plugs, earbuds, or over-the-ear earmuffs.

 

Our Testing Methodology

  • For the Shockwave Flash Forward™ MK1 MOD 0, Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Aguila .22lr Sniper Subsonic 60-grain ammo. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 2 mph. Altitude: 342 feet ASL. Humidity: 65 percent.

  • For the Flash Forward™ MK 1 MOD 1, Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Hornady 190-Grain Sub-X 300 Blackout. Temperature: 72 degrees, sunny. Barometric pressure: 29.99 inches. Average wind speed: 1 mph. Altitude: 342 feet ASL. Humidity: 65 percent.

  • For the Flash Forward™ MK 1 MOD 2, Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Winchester 5.56 NATO 55gr FMJ. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 2 mph. Altitude: 342 feet ASL. Humidity: 65 percent.

  • For the Flash Forward™ MK 1 MOD 3, Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Fiocchi 9mm 158-grain Subsonic Ammo. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 1 mph. Altitude: 342 feet ASL. Humidity: 65 percent.

 

What About Permanent Installation?

Another option is to extend your pistol barrel to rifle length with a permanent installation. You can do this ATF-approved modification and easily convert your pistol to a rifle. 

flash forward installation

In most cases, it’s a better solution than buying a new longer barrel to convert it, as you also get the sound-mitigation benefits.

  • For the Flash Forward™ MK 1 MOD 1, we will offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.


  • For the Flash Forward™ MK 1 MOD 3, we will offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.


  • For the Flash Forward™ MK 1 MOD 2, we will offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a standard threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.


  • For the Shockwave Flash Forward™ MK1 MOD 0, given an overall length of 5.25” and an interface of 1.125”, the Flash Forward lengthens your barrel by 4.125”. The 1.00” outer diameter fits under many popular handguards.



View all four Flash Forwards products now available. Remember, they are Not a Silencer™.

Shockwave Blade Classic and Blade Stealth Now Available in All Colors

The Shockwave Blade Stealth and Shockwave Blade Classic now come in all available colors — Black, FDE, OD Green, and Gray. 

These four colors of the Shockwave Blade are Made in America and allow you to customize your firearm to fit your personal style. 

 

Learn more about each Shockwave Blade® below:

 

Blade® Classic

shockwave blade classic

The veteran-designed Shockwave Blade® Classic pistol stabilizer is slightly smaller than the traditional Shockwave Blade®. 



Blade® Stealth

shockwave blade stealth

The Shockwave Blade® Stealth pistol stabilizer has a slick look and slightly smaller profile, making it an extremely comfortable brace for any user.

 

Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

  • Available in Black, FDE, OD Green, and Gray
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • Manufactured to exacting tolerances
  • Adjustable with a simple pull mechanism
  • Fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. 
  • Made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the simple, vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.

Submit a Comment to ATF to Protect Pistol Stabilizing Braces

On June 7, 2021, the ATF proposed a rule on pistol stabilizing braces that’s going to impact millions of Americans. They’re calling it: Factoring Criteria for Firearms with Attached “Stabilizing Braces.”

 

Here are a couple key highlights in this notice of proposed rulemaking (NPRM):

 

  • ATF is trying to update the definition of a rifle to include any weapon with a rifled barrel that has a stabilizing brace because they believe firearm owners are using these pistol stabilizers with the intent of converting pistols into short-barreled rifles.
  • ATF would apply a “point system” (up to 4 points) to determine whether a pistol stabilizer would convert and classify it as a short-barreled rifle.  

 

If this rule goes into effect, it will be the largest firearms ban in the entire history of the United States that will impact millions of Americans with privately-owned firearms (including thousands of jobs in the firearm industry). These firearms will suddenly become unlawfully possessed  unless owners do the following:

 

  • Add a longer barrel to the firearm so it won’t be considered a short-barreled rifle
  • Surrender the firearm to ATF 
  • Completely remove and destroy the pistol stabilizer (if the firearm was assembled from scratch). 
  • Completely destroy the firearm (if it was an OEM-made firearm because a pistol cannot be made from something that was first manufactured as a rifle).  
  • Pay ANOTHER $200 tax and register the firearm with ATF.  

 

 

That means millions of Americans will become felons by owning these items if this rule gets put in place. 

 

For the sake of gun owners across the country (including yourself) who own a pistol stabilizing brace for your firearm, we need your help to stop this.

 

 

CLICK HERE TO SUBMIT A COMMENT TODAY!

 

 

How to submit a quality comment to make sure it gets counted:

 

  • Include why the proposed rule is arbitrary, vague, complex, and burdensome.
  • Mention the rule is going after lawful gun owners and not criminals.
  • Detail that the rule is vague or complicated and that the “score card” doesn’t make sense
  • Show how the rules is arbitrary
  • Remind them that Arm braces are common
  • Remind them that they are common because the ATF always has said they were legal and provided approval letters
  • Discuss potential for felony penalties
  • Describe how the rule is complex and will be impractical to enforce

 

 

What NOT to include in your comment:

  • Talk about unrelated matters
  • Use the words Tyranny or bootlicker
  • Use profanity
  • Ramble
  • Submit anonymously – it won’t count

 

Comments must be submitted on or before September 8, 2021.

 

You can submit comments in one of three methods (but only one – do not submit multiple times or by more than one method). 

 

  • Federal eRulemaking Portal:
    • ATF recommends that you submit your comments via the Federal eRulemaking portal at www.regulations.gov and following the instructions
    • Link to Comment: Federal Register :: Factoring Criteria for Firearms With Attached “Stabilizing Braces”
    • Keep the comment tracking number that is provided after you have successfully uploaded your comment.
  • Mail:
    • Send written comments to:
      Denise Brown
      Office of Regulatory Affairs, Enforcement Programs and Services, Bureau of Alcohol, Tobacco, Firearms, and Explosives
      ATTN: ATF 2021R-08
      Mail Stop 6N-518
      99 New York Ave. NE
      Washington DC 20226
    • Written comments must include:
      • the reference agency and docket number: ATF 2021R-08
      • Legible and appear in minimum 12-point font size (.17 inches)
      • Commenter’s first and last name
      • Commenter’s full mailing address
      • Must be signed
      • Must be postmarked on or before September 8, 2021
  • Facsimile: 
    • Submit comments by facsimile transmission to (202) 648-9741
    • Faxed comments must include the following:
      • Reference agency and docket number: ATF 2021R-08
      • Legible and appear in minimum 12-point font size (.17 inches)
      • 8 ½” x 11” paper 
      • Commenter’s first and last name 
      • Commenter’s full mailing address
      • Must be signed
      • Must be transmitted on or before September 8, 2021 
      • No more than five pages long



Contact your senator and house representative today to let them know this is unconstitutional and illegal under the current laws under the NFA. 

 

It does matter. It does impact you. 

 

Do your part and make your voice heard to keep this rule from being put in place. 

14 Gun Accessories to Add to Your Wish List

The Holiday Season has sneaked up on us all once again. But finding the perfect items to give your gun-loving family (or yourself) can be a difficult endeavor with the national shortage on firearm supplies due to high demand. 

 

Have no fear. 

 

Because Shockwave Technologies’ gun accessories are Made in America, we’ve been able to quickly fill the gaps for dealers and buyers who want to stock up on the best firearm supplies.

 

And that includes items to add to your Christmas wish list, too.  

 

If you’re looking for some awesome stocking stuffers or Christmas wish list ideas, check out these badass gun accessories for the gifts that keep on giving the whole year round:

 

 

Shockwave Blade®

 

Blade® Pistol Stabilizer 

Made from high-strength glass-reinforced polymer, the Blade pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25” in diameter) such as the Shockwave KAK Pistol Buffer Tube:

  • AR pattern
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Just slip it on and tighten the large set screw for a rock-solid installation.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install
  • Provides additional support during firing
  • Weighs a scant 5.0 ounces
  • ATF-approved for pistol use

 

 

Blade® 2M (Mil-Spec) 

With the same features as the Shockwave Blade pistol stabilizer, the Blade 2M adjusts with a simple finger lever. 

 

It’s compatible with all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install
  • Provides additional support during firing
  • Weighs a scant 4.0 ounces
  • ATF-approved for pistol use

 

 

 

NEW! Blade® Classic

The new, veteran-designed Shockwave Blade Classic pistol stabilizer takes a slightly smaller approach to the traditional signature Shockwave Blade look with all the new desirable features. 

 

It’s made from high-strength glass-reinforced polymer with a QD swivel mount (QD swivel not included). With the vertical-pull latch on the bottom of the Blade, you’ll be able to quickly adjust it to different lengths and gain more support, giving you a boost in safety, marksmanship, and comfort.

 

The Blade Classic pistol stabilizer fits all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Features include:

  • Available in black (coming soon in FDE, ODG, and gray)
  • Ambidextrous side-mounted QDs for sling attachment
  • Quick and easy to install; just slip it on, and it locks in place
  • Provides additional support during firing

Weighs a scant 4.0 ounces 

 

 

NEW! Blade® Stealth

The Shockwave Blade Stealth pistol stabilizer is our very latest design. The new slick look and slightly smaller profile make it extremely comfortable for any user. The Blade Stealth is adjustable with a simple pull-down latch. 

 

Just like the Blade Classic, it’s also made from high-strength glass-reinforced polymer with a QD swivel mount (QD swivel not included) and fits all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube:

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

 

Features include:

  • Available in black (coming soon in FDE, ODG, and gray)
  • Ambi side-mounted QDs for sling attachment
  • Quick and easy to install; just slip it on, and it locks in place
  • Provides additional support during firing
  • Weighs a scant 4.0 ounces

 

 

 

Shockwave AR-15-Pattern Tubes 

 

 

KAK Shockwave Buffer Tube

The KAK Shockwave Buffer Tube is specifically designed for the Shockwave Blade Pistol Stabilizer, creating the world’s best pistol stabilizing system. 

 

With an anti-rotation and anti-thrust design, the Blade stays put without sliding forward or spinning. It’s flush with the rear of the Blade when it’s installed fully forward. When installed fully out, the assembly is incredibly rigid.

 

The Class 3 hard-anodized tube features 12 length-adjustment settings. It’s the same length as a KAK Mil-Spec Carbine Buffer Tube at 7.25 inches. 

 

The KAK Shockwave tube accepts all carbine buffer systems, mil-spec receiver endplates, and aftermarket endplates. 

 

 

KAK Mil-Spec Carbine Buffer Tube

With the same benefits of the KAK Shockwave Buffer Tube, the KAK Industry 6-position Mil-Spec Carbine Buffer Tube is compatible with the Blade 2M, Blade Classic, and Blade Stealth.

 

 

 

 

 

Shotgun Raptor™ Grip

 

With the enhanced texture and ergonomic design of the Raptor Grip, you’ve never been able to hold onto your firearm with as much confidence and control, improving both safety and comfort. Its unique angle minimizes felt recoil, allowing for maximum control shot after shot. It’s also constructed with a glass-filled polymer, making it virtually indestructible. 

 

There are also new Raptor Grip colors available: black, flat dark earth, OD green, and stealth gray. 

 

 

Raptor™ Grip 500/590

The Raptor Grip 500/590 fits:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20-gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

 

Raptor™ Grip 500E (.410) 

The Raptor Grip 500E (.410) / Raptor Grip M500E fits:

  • Mossberg 500E .410 gauge firearms (aka 500E)
  • Mossberg 590E .410 gauge firearms (aka 590E)

 

 

Raptor™ Grip 870

The Raptor Grip 870 fits:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

 

Raptor™ Grip 870 + 20-gauge Adapter

The Raptor Grip 870 fits:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Mesa Tactical’s 20-gauge to 12-gauge adapter is included in this package.  Simply attach it to the receiver in place of the standard 20-gauge stock. This cast steel adapter then enables you to attach the Raptor 12-gauge Remington 870 grip.

 

 

Raptor™ Grip 870 with QD

 

Raptor Grip 870 with a QD swivel fits:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

 

 

 

Shockwave Raptor™ F1™ Forend 

 

When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor™ F1™ forend. Its cutting-edge design improves handling and speeds target acquisition. A direct replacement for your factory or aftermarket forend, the Shockwave Raptor F1 is available as a standalone forend, with an optional upper heat shield, with an optional forend installation tool—or any combination thereof.

 

Features for all the Shockwave Raptor F1 forend include:

  • Rugged glass-reinforced polymer
  • Lightweight
  • Available in black, flat dark earth, OD green and stealth gray
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots allow for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Veteran designed
  • Made in the U.S.A.

 

 

Raptor F1 Forend for Mossberg 500/590

This Raptor F1 forend fits 12-gauge Mossberg 500/590 firearms with both lengths of slide action tubes (7-3/4” and 6-3/4”) thanks to the included adapter. 

 

 

 

Raptor F1 Forend for Mossberg 590/Shockwave 

This Raptor F1 forend fits 12-gauge Mossberg 590 firearms and Mossberg 590 Shockwave firearms, which feature a 6-3/4″ long slide action tube.

 

 

Raptor F1 Forend for Remington 870/TAC-14

This Raptor F1 forend fits 12-gauge Remington 870 firearms, including the TAC-14 featuring the Shockwave Technologies Raptor Grip.  

 

 



Whether you plan on adding some of these gun accessories to your own Christmas wish list or getting it for a fellow gun-lover, make sure you order by December 18, 2020 to ensure it arrives by Christmas!

Learn About the New Shockwave Blade Classic & Blade Stealth

Unsatisfied with the current pistol stabilizer options on the market, Shockwave Technologies released the game-changing Blade pistol stabilizer back in 2015. Since then, our products have only gotten better. 

 

As the Blade enthusiast population has rapidly grown the past several years, dealers, firearm manufacturers and DIY gun builders interested in pistol stabilizers have grown right there with it. This demand has allowed Shockwave to continue making advancements to these products to create the best-in-class pistol stabilizers on the market.

 

In 2020, Shockwave is excited to announce the all new Blade Classic and Blade Stealth.

 

Blade® Classic

shockwave blade classic pistol stabilizer

The new, veteran-designed Shockwave Blade® Classic pistol stabilizer takes a slightly smaller traditional and signature Shockwave Blade® look with all the new desired features. 

 

The Blade Classic pistol stabilizer is manufactured to exacting tolerances, adjustable with a simple pull mechanism, and fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. It’s made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  








Blade® Stealth

shockwave blade stealth pistol stabilizer

The Shockwave Blade® Stealth pistol stabilizer is our latest creation. The new slick look and slightly smaller profile makes it an extremely comfortable brace for any user. The Blade Stealth is adjustable with a simple pull mechanism. 

 

Just like the Blade Classic, it’s also made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel is not included) and fits all pistols equipped with a Mi-spec buffer tube.

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.



Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

 

  • Available in Black (coming soon in FDE, ODG, and Gray)
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.



For dealer orders or packages please contact us at:

 

https://shockwavetechnologies.com/ffl-dealer-packages 

sales@shockwavetechnologies.com 

727-877-8277

How the Shockwave ZMAG™ 30 Fixed Zytel Magazine Issues

The Big 80s Were Great! 80s Plastics Technology? Not So Much.

 

 

The Issues with Zytel Magazines

 

Nearly as much as has been written about the issues regarding Zytel magazines for the M-11/NINE guns as the guns themselves. The main criticisms were primarily that the plastic feedlips would wear out prematurely, leading to feeding unreliability, and that the magazine bodies would sometimes split open, which would add to feeding issues — or simply dump your ammo all over the ground.

 

The springs in Zytel magazines also tended to be quite weak. The springs lacked the strength necessary to tightly push the bullets up against the feedlips, which all too often led to cartridges “nosing down” into the magazine body and causing a jam.



That’s When Shockwave Stepped In

Shockwave ZMAG 30

All these issues with the Zytel magazines created a demand for a better-designed magazine. That’s when Shockwave Technologies entered the picture for MAC owners. Working with a team of American engineers who had decades of experience in sheetmetal stamping, we designed, prototyped, tested, and—in 2014—began manufacturing and selling our ZMAG 30. The 50-round version—the ZMAG 50—followed several months later.

 

Shockwave’s ZMAGs are the perfect upgrade to liven up your M-11/NINE pistols and submachine guns. They’re designed to last generations with their durable steel construction, feed flawlessly with their polymer followers and dependable Wolff springs, and look attractive all the while with their gorgeous Cerakote finish. The ZMAGs also feature witness holes, so you can see at a glance how many rounds you have on tap at any time.

 

Strong, lightweight, easy to load, and simple to disassemble, Shockwave ZMAGs are the last word in M11/NINE magazines.




Back-in-Stock Alert: Shockwave ZMAG™ 30

 

The metal 30-round Shockwave ZMAG for the Cobray M-11 (9mm and .380) is back in stock! Its 8.2 ounce weight and unbeatable design make it head and shoulders above competition.

 

Shockwave ZMAG 30 features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs using these very handy loaders.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come.

 

The Shockwave ZMAG 30 fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

 

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

*ZMAGs are not available for sale in the following states/areas: CA, CO, CT, MA, MD, NJ, NY, and Chicago*

Why You Should Choose an AR-15 Pistol for a Home Defense Firearm

Let’s cut to the chase: The AR-15 pistol is one of the best firearms for home defense. 

 

Why? They’re affordable, reliable, accurate, and found everywhere. It’s no wonder the AR-15 is informally known as America’s 21st Century musket. And for good reason. 

 

When an intruder sees the easily recognized AR in your hands, they know you mean business. 

 

Learn about the evolution of the AR and AR pistol

 

But first, let’s dive into the benefits of using an AR-15 pistol for home defense. Each benefit is like a ripple effect — they all go hand in hand to make this firearm perfect for defense purposes. 



Benefits of an AR-15 Pistol for Home Defense

 

shockwave blade stealth ar-15 pistol

Affordable

 

You can find an AR-15 pistol to fit every budget: from just a few hundred dollars to the “sky is the limit.” The typical .223 ammunition is easily found in stores (when there’s not a global pandemic unfolding daily or nightly riots) and one of the least expensive ammos, with prices averaging about 32 cents per round. 

 

 

Low Recoiling

 

A low recoil makes the AR-15 pistol easy to shoot and a good option for beginners — even younger members of the family.

 

 

Accuracy

 

Because of such low recoil, accuracy is improved for most shooters.

 

 

Lightweight

 

At a mere 6 pounds — with ammo! — the AR-15 pistol is light enough for shooters of all ages and experiences. Because it has such a lightweight body, you can easily customize and add accessories to your firearm without making it too heavy to handle safely and accurately — especially in a home defense scenario. 

 

 

Ergonomically Designed

 

Many features of the AR-15 pistol are designed with ergonomics in mind, making this firearm comfortable and safe to shoot: pistol grip, trigger reach, safety location, forward handguard, sights, etc.

 

 

Ammo Capacity

 

A typical AR-15 pistol magazine holds 30 rounds of ammo. 

 

Many experts recommend using the .223 cartridge because it’s typically easy to find in stores,  inexpensive, and provides lower recoil. Some recommend using a 55-grain soft-point load that minimizes bullet penetration, which can be beneficial to protect your family in other parts of the home (or surrounding neighbors) in case the bullet misses the intended target. However, as you may know, the AR-15 is available in a multitude of calibers.

 

 

Size

 

During a home invasion, you don’t want to be turning corners and allow the intruder to discover your location before you know theirs. The AR-15 pistol is a great option for home defense due to its relatively short length, allowing you to turn corners discreetly and avoid disclosing your location that can put your defense game at risk. 

 

 

Customizable

 

From function to ergonomics to aesthetics, there are simply too many types of firearm accessories for customizing your AR-15 pistol than we can possibly cover here: grips, forearms, slings, sights, lights, lasers, scopes, red dot sights, triggers, muzzle devices, and so on. 

 

For home defense purposes, however, we recommend keeping it simple. Focus on the following accessories:

  • Brace, grip and/or sling: for better and safer control of your firearm
  • Flashlight: for better visibility in low-light conditions and stunning any intruders with the bright illumination
  • Red dot sight: for accuracy



A note about pistol braces:

 

Whether you’re building a custom AR-15 pistol or bought an AR-15 pistol without a brace, adding a brace can improve control and accuracy.

 

An AR-15 pistol cannot have a stock but it can have a brace, such as the Shockwave Blade and Shockwave Blade 2M. 





Shockwave AR-15 Pistol Accessories

 

Shockwave Technologies offers products to enhance your home defense use (and enjoyment) of your AR-15 firearms. Check out these Shockwave products compatible with AR-15 pistols.

 

 

Blade®

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 

 

 

Blade® 2M

 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 

What is a non-NFA firearm?

What does it take to innovate a stubby little firearm that shoots 12- and 20-gauge shotgun shells—that isn’t classified as a short-barreled shotgun? A little creativity and a rebellious attitude to disrupt the firearms market. And that’s exactly what Len Savage of Historic Arms did in the late 00s / early 10s. He came up with the whole idea of what many would later term the “not a shotgun.”

 

Len Savage is first and foremost an American. He’s also an incredibly smart firearms designer and businessman. He’s been called as a subject matter expert on several high-profile trials that have involved the ATF (Bureau of Alcohol, Tobacco, Firearms, and Explosives). Because of his encyclopedic knowledge of firearms and the overwhelming, often-contradictory myriad of laws, orders, rulings, findings, letters, etc. that have come out of the ATF over the years, those cases never really worked out for the ATF. In other words, let’s just say he’s not exactly on their Christmas card list. 

 

Mr. Savage didn’t make the rules. And he certainly doesn’t break them. But sometimes he finds new solutions to meet the rules in unique ways that give firearms owners what they want while making things a bit more hassle-free for them. And that’s what he did with the “not a shotgun” concept.

 

Such a firearm would allow buyers to make a quick purchase at their local dealer without all the extra paperwork and waiting on NFA tax stamps. Pricing could also be kept fairly low on such a simple firearm, making it a no-brainer for buyers looking for a compact yet powerful firearm for home defense.

 

Hearing about the “not a shotgun” idea in the early 10s, the founder of Shockwave Technologies contacted Mr. Savage and discussed plans for introducing a new birdshead grip for the Mossberg 500 and Remington 870 firearm families. As it turned out, the Raptor™ Grip’s length was perfect for making the “not a shotgun” a reality with a 14” barrel, an overall length of over 26”, and built on a receiver that had never had a stock attached to it. However, because of Mr. Savage’s “history” with the ATF, he wasn’t about to bring such a product to market. He didn’t trust them. He loves his dog too much. And his freedom.

 

NFA Firearm vs Non-NFA Firearm

 

But maybe we’re getting ahead of ourselves, so let’s back up for a minute. Before we can get into what a “not a shotgun” (a.k.a. a non-NFA firearm) is, we should consider what makes an NFA firearm an NFA firearm—and requires an NFA tax stamp—in the first place. Because the definition is more about what it’s not than what it is.

 

Regardless of the 18” barrel length rule, to be an NFA short-barreled shotgun (SBS), a firearm must first be a shotgun. Meaning, it has to be designed to be fired from the shoulder. Since the “not a shotgun” isn’t designed to be fired from the shoulder, it can’t be an SBS.

 

One of the key features of an NFA Any Other Weapon (AOW) is that it must be capable of being concealed on a person. And the ATF defines that capability as being less than 26” in overall length. Since the “not a shotgun” is over 26” long, it can’t be an AOW either.

 

The NFA makes an exemption for firearms firing fixed shotgun shells. So it also can’t be classified a Destructive Device (DD).

 

So what the hell is it? Simply put, it’s just a firearm — one not subject to the NFA tax stamp requirements.

 

Shockwave Came into the Story

 

Shockwave Technologies began selling the Raptor Grip in 2011. The unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. Small businesses and individual customers alike began buying the Raptor Grips and building their own “not a shotgun” creations. Len Savage enjoyed many long walks with his dog.

 

With the election of Donald Trump in 2016, you may remember that the firearms market took a bit of a nosedive. Manufacturers were looking for new, innovative products to boost sales. That’s when Mossberg and Remington came knocking on Shockwave’s door. And the rest is history, as they say.

 

With a short 14-inch barrel and the Raptor Grip, the Mossberg 590 Shockwave was the first to hit the market. Because it didn’t feature a buttstock, wasn’t intended to be fired from the shoulder, and was over 26 inches in overall length, the Mossberg 590 Shockwave was classified as a non-NFA firearm by the ATF.

 

The next up was the Remington 870 TAC-14. Similar to the Mossberg 590 Shockwave, the TAC-14 sported a 14-inch barrel, Shockwave Raptor Grip, and overall length of just over 26 inches. It too was found to be a non-NFA firearm by the ATF.

 

Since then, Mossberg has introduced versions of their 590 Shockwave in 20- and .410 gauges. Likewise, Remington has brought a 20-gauge version of the TAC-14 to market in recent years.

 

One of the newest innovations is the Remington V3 TAC-13. This unique non-NFA firearm is semi-auto, making it softer recoiling thanks to the Versaport gas system. It features a 13” contoured barrel, the Shockwave Raptor Grip with our new Shockwave QD1 cup. It’s a bit more expensive than the other “not a shotguns.” But it transfers just like any Title 1 firearm.

 

Build Your Own Shockwave

 

Did you know you can build your own “Shockwave”? 

If you own a Mossberg 500/590, Maverick 88, or Remington 870 (see which firearms are compatible) and, critically, it’s never had a stock on it, all you have to do is install a Raptor Grip and 14” barrel on it. 

 

Of course, gun owners should be sure to check their state and local laws first to make sure a “not a shotgun” is legal in their area.  

 

Specifications of the Mossberg 590 Shockwave:

 

 

Specifications of the Remington 870 TAC-14:

 

 

Specifications of the Remington V3 TAC-13:

 

  • Type: Semi-automatic gas operated, non-NFA firearm
  • Gauge: 12
  • Chamber: 3 in.
  • Barrel: 13 in.
  • Overall Length: 26.5 in.
  • Weight: 6 lbs.
  • Grip: Shockwave Technologies Raptor™ grip
  • Forend: Remington
  • Sight: Bead sight
  • Barrel Type: Cylinder bore
  • Capacity: 5 rounds
  • Price: $933
  • Manufacturer: Remington

Which Firearms are Compatible with Shockwave?

What makes Shockwave™ Technologies’ line of products so great is not only the unparalleled quality of the items, but that they’re also Made in America and veteran designed, engineered, marketed, and sold. Check out some of our popular product lines at Shockwave Technologies and experience the difference yourself. Find out which firearms are compatible with Shockwave below.

 

Shockwave™ Raptor™ Product Line

 

Raptor™ Grip 

Shockwave raptor grip
The unique angle of the Raptor™ Grip minimizes felt recoil, allowing maximum control shot after shot. Paired with the Raptor F1™ Forend, you gain a great hold on your firearm with their enhanced texture. The glass-filled polymer construction is virtually indestructible.The Raptor™ Grip is compatible with both 12-gauge and 20-gauge firearms with 18.5”, 20”, and longer barrels.

 

Our Raptor™ Grip 500/590 is compatible with:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20 gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

Our Raptor™ Grip 870 and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump 12-gauge
  • Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

Our Raptor Grip 870 for 20-gauge and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump 20-gauge
  • Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Our Raptor™ Grip 500E is compatible with:

  • Mossberg 500E .410 gauge firearms 
  • Mossberg 590E .410 gauge firearms



Raptor™ F1 Forend

Raptor™ F1 Forend
The cutting-edge design of the Shockwave Raptor™ F1 forend meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend.

 

Compatible with:

  • Mossberg 500 12-gauge
  • Mossberg 590 12-gauge
  • Mossberg 590 Shockwave 12-gauge
  • Remington 870 12-gauge
  • Remington Tac 14 12-gauge

 

Features include:

  • A total of 10 M-LOK® slots for mounting lights,vertical grips, angled grips, Picatinny rails, and more
  • The optional upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • Veteran designed



Raptor™ Forend Tool

Raptor™ Forend Tool

If you’ve ever tried to remove or install a forend nut on a pump-action shotgun, you know how frustrating that can be — and the potential damage to your gun. Whether the nut protrudes or is recessed, and no matter how long your magazine tube, you can now quickly and easily reach it. The nut tool works for all forends including the Streamlight TL-Racker forend. Replace your forend in under two minutes.

 

The Shockwave Technologies Raptor™ Forend Nut tool is made for Mossberg 500/590 and Remington 870 Forends. One side fits Mossberg 500/590, and the other Remington 870 and Hawk 982 12-gauge firearms.





Raptor™ Strap Kit

Raptor™ Strap Kit

The Raptor™ Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. It’s easy and quick to install in about 10 minutes. And it improves handling immensely!

 

The Raptor™ Strap is designed for the tactical forearm, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor™ Strap kit is compatible with:

  • Mossberg 500 forends
  • Mossberg 590 forends
  • Remington 870 forends
  • Magpul forends
  • Shockwave Raptor F1™ forends






Shockwave Blade® Product Line



Blade® 

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 








Blade® 2M 

Shockwave Blade® 2M 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 





Shockwave ZMAG™ Product Line

 

30 Round ZMAG™ and 50 Round ZMAG™

30 Round ZMAG™ and 50 Round ZMAG™

The design of the all-metal 30-round Shockwave ZMAG™ and 50-round Shockwave ZMAG™  for the Cobray/SWD M-11 (9mm and .380) is head and shoulders above the competition. 

 

The Shockwave ZMAG™ fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

Some exclusive features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch hole.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come. 

5 Questions To Ask Before Buying A Gun

When it comes to buying a gun, there are a few key questions you need to ask yourself before walking into a gun store and letting your emotions drive your purchase. It’s crucial to do your research and prepare ahead of time with questions you want to ask the gun dealer before you pull out your wallet and walk out as a new gun owner. 

5 Questions To Ask Before Buying A New Gun

 

1) Why are you interested in buying a gun? 

 

Whether you’re interested in buying a gun for sport, hunting, or personal defense, it’s important to know why you plan to buy a gun and the type of gun you need, so you can prepare the right questions to guide your purchase. 

 

Once you determine the type of gun you want to buy, don’t skip out on doing your research. If you want a firearm for home defense, you’ll want to consider what makes the best home defense firearm and accessories. Is it an AR? Is it a shotgun? If you can’t decide which one you need after doing your research, have your questions ready to ask the gun dealer to help you determine which firearm will work best for you.

 

As Off The Grid News puts it, you first “identify the purpose, and choose a [firearm] to fill that purpose.”



2) Is it the right fit?

 

After determining why you need a gun and the type of gun you need, it’s time to test out the ergonomics. When you go to your local firearm dealer, handling the gun and making sure it’s a good fit for your hands is very important for safety, comfort, and accuracy. You’ll also want to find out how much the gun recoils when fired, which is important to know depending on the firearm’s purpose and how often you plan to use it. 

 

If you’re not sure the gun is a good fit, there are a couple of options you can consider:

 

  1. Find out if there is a local shooting range nearby that will let you test out the gun or rent the gun, so you can determine if it’s going to be worth purchasing. 
  2. Ask the gun dealer if they can help you find a gun that fits your hand properly. A gun that’s too big is hard to hold onto. One that’s too small may be harder to shoot accurately.


Check out our blog about Shockwave Raptor™ Grips and why ergonomics are important for firearm design



3) What’s your budget?

 

Firearms can get quite expensive, so it’s important to stick to a budget and choose one that will fit your purpose before buying a gun. Regardless of the price range of the firearm you’re interested in, it’s important to do your due diligence to know the right price for a specific model, know when someone is trying to oversell you, and know when a great deal comes along.

 

Don’t forget to budget for other things that come along with buying a gun — from taxes, to background checks, to accessories, to ammunition, to permits, and more. Ask the gun dealer if there are any extra costs and fees involved. 

 

If you’re pinching pennies to budget for a new gun or not confident about the gun you are considering, again, you might want to ask the gun retailer (or do your research) to see if there are any nearby shooting ranges that allow you to try before you buy.

 

If you are a veteran or first time buyer, you might even ask the gun dealer if there are any discounts, rebates, or sales going on that would benefit your purchase of the firearm. 

 

Lastly, check out the required firearm transaction record form to see if anything might disqualify you from purchasing a firearm. Focus on questions 11a-11i, 12, and 13 to determine this.



4) Which firearm accessories can you add on?

 

Whether you need home defense firearm accessories, want to accessorize for aesthetic purposes, or need maintenance kit items to keep your gun clean, don’t forget to include these in your budget. The main accessories you want to consider are those that will enhance the experience, accuracy, and comfort of your firearm for its intended purpose. 

 

You’ll also want to consider how you plan to store your gun. Firearm storage can be expensive, but an important way to keep your loved ones safe and keep it from being easily stolen. 

 

Lastly, for training purposes, it’s important to have the accessories you need to protect yourself from misuse that could cause injury or worse. Find out where you can get basic safety training or safely practice shooting your gun to get used to it. You can even watch tutorials online to show you how to use the gun, what each function means, how it shoots, and so forth to prepare you for your training phase after purchase. 

 

Do your research and determine which accessories are important for your firearm of choice.

 

Examples of Shockwave Technologies and partner firearm accessories include:

 

 

View https://shockwavetechnologies.com to view all firearm accessories.



5) What are the firearm’s capabilities and performance?

 

Knowing the performance and capabilities of your firearm are also important before purchasing. A few things you might want to know include:

 

  • Bullet drop
  • Bullet or shot grouping
  • Magazine capacity

 

The bullet drop is the distance that a bullet drops after being fired over a certain distance — and largely a function of the cartridge the firearm is chambered for. Bullet drop is an important and potentially complex component of ballistics for gun owners for a variety of reasons, whether hunting, target shooting, etc. Discuss this aspect with your dealer. 

 

Bullet or shot grouping relates to the accuracy of the firearm. In short, it indicates how closely each round will hit in relation to each other. Tightness of shot groupings are measured based on the distance between each bullet hole on the target. Accuracy is not only important for target shooters and hunters, it’s also important for self protection and other firearm uses.

 

Magazine capacity lets you know how many rounds of ammunition you have “on tap” in each magazine. Whether you are target practicing or firing your gun in self defense, it’s important to know how many shots you have available before you need to reload.



What other questions do you like to ask yourself or the gun dealer before purchasing a new firearm? Leave a comment below. 

Top 5 Firearm Accessories for Home Defense

There’s nothing more intimidating than the sound of a shotgun pumping and gearing up for fire. For this reason, we’re all about using a shotgun in general for home defense — and that pump action can be scary enough to ward off an intruder before you have to take any necessary action to protect your household. But more specifically, we vouch for the Mossberg 590 Shockwave for the purpose of this topic.

 

The Mossberg 590 is considered a top home defense firearm across the web and we couldn’t agree more. With a shorter barrel than a traditional shotgun (which is typically used for hunting and clay shooting), you can get around corners and down the stairs more easily with a Mossberg 590 Shockwave. 

 

But the shotgun itself isn’t the only element needed to be prepared with the best home defense kit. Check out our top firearm accessories that you need for home and personal defense:

 

Shorty Shotshells

shorty shells with opsol mini clip

What is a shorty shotshell? A shorty shell (or mini shell) is a shotgun shell about half the length of a traditional shell, typically running at 1.75-inches long. They don’t blow a huge hole in the wall because they have a more narrow and targeted area of penetration. They also have less power and velocity (but enough of it to be a perfect fit for home defense). And lastly, you can fit more shorty shotshells in a tube meaning more rounds to ensure you don’t run out of ammo when a home intruder attempts to attack. 

 

When it comes to Shockwave, we believe buckshot shorty shells are the way to go.



Raptor Grip

Shockwave raptor grip

With the enhanced texture and ergonomic design of the Raptor™ Grip, you’ve never held onto your firearm with as much confidence and control for both safety and comfort. Its unique angle minimizes felt recoil, allowing for maximum control shot after shot. It’s also constructed with a glass-filled polymer, making it virtually indestructible. 

 

With less recoil, mini shells work great with the ergonomic design of the Raptor™ Grip. This is especially important for those who may be more recoil sensitive.

 

There are also new Raptor™ Grip colors available: black, FDE, OD green, and gray. 

 

Learn more about the Raptor™ Grip R870 and Raptor™ Grip M500/590.

 

OPSol Mini Clip

shockwave opsol mini clip

The OPSol Mini Clip only goes on Mossberg firearms and is specifically designed so that you can use short shells without jams. It allows you to easily install and uninstall in seconds to allow use of 1.75?, 2.75?, or 3? shells (as desired) with lower recoil for safe, easy, and comfortable aiming and discharging.





Flashlight Mount

shockwave flashlight mount

A GG&G flashlight mount for your Mossberg allows you to install a bright flashlight that will not only allow you to easily see where you’re going during the night and see your target, but the strong light can also stun your intruder, making it difficult for them to see you. Being in the bright spotlight will also make them feel exposed and more likely to run than to continue with their intrusion, knowing that they are a clear target of your shotgun. 

 

GG&G developed the Shockwave Flashlight Mount specifically for the Mossberg 590 Shockwave because its forend is a reconfigured version of Mossberg’s 590 foregrip. Our 590 flashlight mount which is similar, is a hair too close to the foregrip, so if you own one of the new Mossberg’s and need a flashlight mount, this is the one to get.

 

The GG&G Flashlight Mount for Mossberg 590 Shockwave:

 

  • Installs easily and is perfect for mounting a tactical flashlight to your Mossberg 590 Shockwave shotgun.
  • Manufactured specifically for the 12-gauge Shockwave (will not fit the 20-gauge Shockwave).
  • Designed, tested, and manufactured to withstand the rigors associated with professional use. It’s also been manufactured from bullet proof AS-35 Geneva steel and 6061-T6 billet aluminum.
  • Features an ambidextrous design that can be mounted on either side of the Mossberg Shockwave to accommodate both right- handed or left- handed shooters.
  • Offers dehorned edges (rounded, smoothed, and beveled) to protect the shooter.
  • Includes a Lifetime Warranty
  • Made in America by men and women proud to be Americans! 



Forend Strap

shockwave forend strapEnsuring you have a secure forend strap is an important safety feature that will protect yourself when in the heat of the moment of a surprise home invasion. A forend strap will keep a nervous, sweaty hand from slipping in front of your Mossberg 590 Shockwave shotgun and give you better control of your firearm to protect your loved ones. 

The Raptor Strap kit for the Mossberg 500 and 590 forends is designed for the tactical forearm image shown here, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. You can easily install this within 10 minutes using a drill, an 1/8” drill bit, and a Phillips-head screwdriver for installation.