How many times has this happened to you? You want to clean your Mossberg 500 or Remington 870, but as you’re stripping it down, you find your forend nut is stuck? Or you don’t have the right tool?
You end up making do with a hammer and punch, or other unsuitable combination of devices. But as you’re wailing away on your nut and trying to get it off, you end up doing some real damage to your gun.
Next thing you know, you’ve now got to spend the cash to go see a professional for gun repair — and see if they can clean up the mess you’ve created.
Fret no more.
Shockwave has you covered. Remove and replace your forend in under two minutes with the Shockwave Raptor Forend Nut Tool. Full 304 stainless steel construction, this handy dandy device is proudly made in the U.S.A.
Being double-ended, one tool fits both Mossberg 500 and Remington 870 guns.
Extra long, the Shockwave Raptor Forend Nut Tool can reach the deepest of nuts on the longest of magazine tubes. Being stainless, it won’t rust like a carbon-steel tool or deform like a nylon or aluminum tool. That means you’re always assured of being able to get off the most stubborn nuts.
Just grasp the tool with your dominant hand, work it over the magazine tube and into your nut. Then just a twist to the left. Voila, your nut’s off. Reassembly is simply the reverse.
Need more leverage? A thin metal bar or even a screwdriver can be inserted through the hole in the end. On exceedingly long magazine tubes, a rubber strap wrench can often be employed with great success.
Insert a bar or screwdriver through one of the provided holes for extra leverage
Over 4? long for reaching the deepest recessed nuts on the longest magazine tubes
No need to remove the magazine tube from your firearm
One side fits Mossberg 500 guns and the other Remington 870 and Hawk 982 guns
Fits 12-gauge guns with short, medium, long or even extra long magazine tubes
Compatible with the Streamlight tactical forend.
Of course, safety first. Whenever cleaning your Mossberg 500 or Remington 870 (or any gun for that matter), you always want to make sure your chamber’s empty, as you wouldn’t want your gun to go off accidentally.
What does it take to innovate a stubby little firearm that shoots 12- and 20-gauge shotgun shells—that isn’t classified as a short-barreled shotgun? A little creativity and a rebellious attitude to disrupt the firearms market. And that’s exactly what Len Savage of Historic Arms did in the late 00s / early 10s. He came up with the whole idea of what many would later term the “not a shotgun.”
Len Savage is first and foremost an American. He’s also an incredibly smart firearms designer and businessman. He’s been called as a subject matter expert on several high-profile trials that have involved the ATF (Bureau of Alcohol, Tobacco, Firearms, and Explosives). Because of his encyclopedic knowledge of firearms and the overwhelming, often-contradictory myriad of laws, orders, rulings, findings, letters, etc. that have come out of the ATF over the years, those cases never really worked out for the ATF. In other words, let’s just say he’s not exactly on their Christmas card list.
Mr. Savage didn’t make the rules. And he certainly doesn’t break them. But sometimes he finds new solutions to meet the rules in unique ways that give firearms owners what they want while making things a bit more hassle-free for them. And that’s what he did with the “not a shotgun” concept.
Such a firearm would allow buyers to make a quick purchase at their local dealer without all the extra paperwork and waiting on NFA tax stamps. Pricing could also be kept fairly low on such a simple firearm, making it a no-brainer for buyers looking for a compact yet powerful firearm for home defense.
Hearing about the “not a shotgun” idea in the early 10s, the founder of Shockwave Technologies contacted Mr. Savage and discussed plans for introducing a new birdshead grip for the Mossberg 500 and Remington 870 firearm families. As it turned out, the Raptor™ Grip’s length was perfect for making the “not a shotgun” a reality with a 14” barrel, an overall length of over 26”, and built on a receiver that had never had a stock attached to it. However, because of Mr. Savage’s “history” with the ATF, he wasn’t about to bring such a product to market. He didn’t trust them. He loves his dog too much. And his freedom.
NFA Firearm vs Non-NFA Firearm
But maybe we’re getting ahead of ourselves, so let’s back up for a minute. Before we can get into what a “not a shotgun” (a.k.a. a non-NFA firearm) is, we should consider what makes an NFA firearm an NFA firearm—and requires an NFA tax stamp—in the first place. Because the definition is more about what it’s not than what it is.
Regardless of the 18” barrel length rule, to be an NFA short-barreled shotgun (SBS), a firearm must first be a shotgun. Meaning, it has to be designed to be fired from the shoulder. Since the “not a shotgun” isn’t designed to be fired from the shoulder, it can’t be an SBS.
One of the key features of an NFA Any Other Weapon (AOW) is that it must be capable of being concealed on a person. And the ATF defines that capability as being less than 26” in overall length. Since the “not a shotgun” is over 26” long, it can’t be an AOW either.
The NFA makes an exemption for firearms firing fixed shotgun shells. So it also can’t be classified a Destructive Device (DD).
So what the hell is it? Simply put, it’s just a firearm — one not subject to the NFA tax stamp requirements.
Shockwave Came into the Story
Shockwave Technologies began selling the Raptor Grip in 2011. The unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. Small businesses and individual customers alike began buying the Raptor Grips and building their own “not a shotgun” creations. Len Savage enjoyed many long walks with his dog.
With the election of Donald Trump in 2016, you may remember that the firearms market took a bit of a nosedive. Manufacturers were looking for new, innovative products to boost sales. That’s when Mossberg and Remington came knocking on Shockwave’s door. And the rest is history, as they say.
With a short 14-inch barrel and the Raptor Grip, the Mossberg 590 Shockwave was the first to hit the market. Because it didn’t feature a buttstock, wasn’t intended to be fired from the shoulder, and was over 26 inches in overall length, the Mossberg 590 Shockwave was classified as a non-NFA firearm by the ATF.
The next up was the Remington 870 TAC-14. Similar to the Mossberg 590 Shockwave, the TAC-14 sported a 14-inch barrel, Shockwave Raptor Grip, and overall length of just over 26 inches. It too was found to be a non-NFA firearm by the ATF.
Since then, Mossberg has introduced versions of their 590 Shockwave in 20- and .410 gauges. Likewise, Remington has brought a 20-gauge version of the TAC-14 to market in recent years.
One of the newest innovations is the Remington V3 TAC-13. This unique non-NFA firearm is semi-auto, making it softer recoiling thanks to the Versaport gas system. It features a 13” contoured barrel, the Shockwave Raptor Grip with our new Shockwave QD1 cup. It’s a bit more expensive than the other “not a shotguns.” But it transfers just like any Title 1 firearm.
Build Your Own Shockwave
Did you know you can build your own “Shockwave”?
If you own a Mossberg 500/590, Maverick 88, or Remington 870 (see which firearms are compatible) and, critically, it’s never had a stock on it, all you have to do is install a Raptor Grip and 14” barrel on it.
Of course, gun owners should be sure to check their state and local laws first to make sure a “not a shotgun” is legal in their area.
What makes Shockwave™ Technologies’ line of products so great is not only the unparalleled quality of the items, but that they’re also Made in America and veteran designed, engineered, marketed, and sold. Check out some of our popular product lines at Shockwave Technologies and experience the difference yourself. Find out which firearms are compatible with Shockwave below.
Shockwave™ Raptor™ Product Line
The unique angle of the Raptor™ Grip minimizes felt recoil, allowing maximum control shot after shot. Paired with the Raptor F1™ Forend, you gain a great hold on your firearm with their enhanced texture. The glass-filled polymer construction is virtually indestructible.The Raptor™ Grip is compatible with both 12-gauge and 20-gauge firearms with 18.5”, 20”, and longer barrels.
The cutting-edge design of the Shockwave Raptor™ F1 forend meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend.
Mossberg 500 12-gauge
Mossberg 590 12-gauge
Mossberg 590 Shockwave 12-gauge
Remington 870 12-gauge
Remington Tac 14 12-gauge
A total of 10 M-LOK® slots for mounting lights,vertical grips, angled grips, Picatinny rails, and more
The optional upper heat shield to prevents burns and offers rifle sights for fast target acquisition
Rugged glass-reinforced polymer
Extra length lets you personalize forward handhold
Ribbed inset area provides secure gripping
Front and rear handstops improve safety
Raptor™ Forend Tool
If you’ve ever tried to remove or install a forend nut on a pump-action shotgun, you know how frustrating that can be — and the potential damage to your gun. Whether the nut protrudes or is recessed, and no matter how long your magazine tube, you can now quickly and easily reach it. The nut tool works for all forends including the Streamlight TL-Racker forend. Replace your forend in under two minutes.
The Shockwave Technologies Raptor™ Forend Nut tool is made for Mossberg 500/590 and Remington 870 Forends. One side fits Mossberg 500/590, and the other Remington 870 and Hawk 982 12-gauge firearms.
Raptor™ Strap Kit
The Raptor™ Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. It’s easy and quick to install in about 10 minutes. And it improves handling immensely!
The Raptor™ Strap is designed for the tactical forearm, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.
The Raptor™ Strap kit is compatible with:
Mossberg 500 forends
Mossberg 590 forends
Remington 870 forends
Shockwave Raptor F1™ forends
Shockwave Blade® Product Line
Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.
Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
Available in black, flat dark earth, OD green, and stealth gray
Madefrom high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place. Adjusts with a simple finger lever.
Compatible with all pistols equipped with a Mil-spec buffer tube:
CZ Scorpion Evo 3
Available in black, flat dark earth, OD green, and stealth gray
Shockwave’s Raptor™ Grips are Back in Black… and FDE, OD green, and gray. These four colors match the new forends and heat shields, and allow you to customize your firearm to fit your personal style. And we won’t fail to mention that this product has been manufactured by Shockwave Technologies LLC in the USA…. a.k.a. MADE IN AMERICA. None of that foreign crap. That’s just one of the simple ways we like to show our patriotism.
With the enhanced texture of the Raptor™ Grip, you’ve never held onto your firearm with as much confidence and control for both safety and comfort. Its unique angle minimizes felt recoil, allowing for maximum control shot after shot. It’s also constructed with a glass-filled polymer, making it virtually indestructible. Now that’s the kind of quality you can’t get in a foreign product.
Whether you want to call this new style a bird’s head grip, witness protection grip, chicken head grip, border patrol grip, or entry-style grip… it’s really just one badass grip made for a badass gun owner.
These are the Raptor™ Grips on the Remington TAC-14, Remington v3 TAC-13 and Mossberg 590 Shockwave line for home and personal defense.
If you’ve never thought about what ergonomics are or why they’re important, I’m about to change your perspective on gun purchasing forever.
While most people think of ergonomics in the workplace, they also matter to products we love to use — like firearms. In the firearms world, a product that’s ergonomic means it’s been designed to fit the user in a safer, more comfortable, and more practical way.
Why is that important? Because, believe it or not, ergonomics affect your entire body. When shooting a gun, you hold your body and arms in a specific position to have proper sight/picture alignment, firearm control, and recoil management. However slight, poor ergonomics of a firearm can have a significant impact on your musculoskeletal system, which controls your muscles, joints, tendons, ligaments, and nerves. If you go to the shooting range often or spend a good chunk of time doing target practice, a gun without good ergonomic design can cause muscle stress, fatigue, discomfort, pain, or even injury.
Shockwave’s Raptor™ Grips are specifically designed with ergonomics (and you) in mind. Our grips make it easier for gun owners to use their firearms safely, effectively, and comfortably with decreased risk of musculoskeletal injury.
Raptor™ Grip vs. pistol grip
As you know, the grip is the part of the firearm you grasp with your hand to operate the trigger. Some grips even serve multiple functions, such as stabilizing the gun and providing storage for magazines, bipods, or tools. But some grips are better than others.
When it comes to choosing a Raptor™ Grip over a pistol grip, which one do you choose? We may be biased, but we’ll give you the basic breakdown on why the Raptor™ Grip is the best choice.
A pistol grip aligns your wrist in a straight up- and down, thumbs-up position, completely perpendicular to the direction of recoil. As a result, the recoil goes straight into your wrist joint—and can hurt like hell when you fire a heavy-recoiling shotgun.
With the Raptor™ Grip, you hold the grip in a more natural position, with your thumb pointed forward so your wrist is not kinked back into that vertical thumbs-up position. With the Raptor™ Grip, the recoil is transferred along your forearm, through the elbow, into your bicep, and finally into your shoulder and body. You feel much less recoil. And since you just read about the importance of great ergonomic design, this fits the bill perfectly.
When it comes to choosing a grip, this should be your takeaway: due to poor ergonomics, you are much more likely to do serious damage to your hand and wrist with a pistol-grip shotgun that one outfitted with the Shockwave Raptor™ Grip.
Comfort and control are crucial when it comes to handling a firearm to prevent injury. So choose the Raptor™ Grip.
As seen in..
Did you know the Raptor™ Grip has been featured in popular movies? Because it’s badass.
In early 2013, an armorer for the Hand Prop Room in Los Angeles contacted Shockwave. This armorer mentioned they were building some custom props for a Planet of the Apes sequel and wanted to know if we had a Raptor™ Grip for the Remington 870. At the time, we didn’t have any production units for sale, so we sent him a couple of R&D samples taken off of the RTV mold. We occasionally supply Shockwave items to various movie outfits but don’t always hear back. But the Raptor™ Grip R870 was seen on the big screen as the Dawn of the Planet of the Apes movie was released.
It’s simple. Our products are Made in the USA and our ergonomic-enhancing products stand the test of time. No BS here.
We provide innovative tactical accessories for pistols and shotguns. Our firearm accessories are made with high-quality materials and finishes, from Cerakoted stainless steel to our glass-filled polymer construction. We value quality and guarantee our products for life. Veteran designed, engineered, marketed, and sold.
Shockwave Raptor™ Grips come in in four colors: black, OD green, FDE, and gray. Learn more about Shockwave Technologies and our products.