Pistol Stabilizers are BACK! | Federal Judge Blocks Nationwide Enforcement of the Pistol Brace Rule

Last Wednesday, Judge Matthew Kacsmaryk of the United States District Court in the Northern District of Texas granted injunction relief (an injunction) to prevent the ATF from enforcing the ATF’s Factoring Criteria for Firearms with Attached Stabilizing Braces rule-nationwide. What does this mean? In short, as far as pistol braces go, we’re back to 2021.

To obtain this injunction, the plaintiffs needed to satisfy four rules:

  1. They must be likely to prevail on the merits.
  2. They would suffer irreparable harm if denied.
  3. The injury outweighs any harm that would be caused if the injunction is granted.
  4. The public interest supports relief.

Judge Kacsmaryk also noted that the rule would cause horrendous strain on companies who produce stabilizing braces. “Additionally, ATF admits the 10-year cost of the Rule is over one billion dollars,” he wrote. “And because of the Rule, certain manufacturers that obtain most of their sales from stabilizing braces risk having to close their doors for good.” Here at Shockwave, we are very thankful for all the support our customers and 2nd amendment organizations have provided to help keep the fight going. We wouldn’t still be here without you.

In the ruling Judge Kacsmaryk stated,“[T]he Court is certainly sympathetic to ATF’s concerns over public safety in the wake of tragic mass shootings. The Rule ’embodies salutary policy goals meant to protect vulnerable people in our society,’” Judge Kacsmaryk wrote in Britto v. ATF. “But public safety concerns must be addressed in ways that are lawful. This Rule is not.”

There are two main items he noted in his ruling for injunctive relief:

  1. The ATF did not follow the Administrative Procedures Act (APA).  

He wrote, ‘[t]he controlling law of this case is that the Government Defendants’ promulgation of the Final Rule ‘fails the logical-outgrowth test and violates the APA’ and ‘therefore must be set aside as unlawful’ under the APA,’”

  • The ATF is violating the 2nd Amendment.

He added,“Absent injunctive relief, the Final Rule will impair and threaten to deprive them of their fundamental right to keep and bear commonly used arms as a means of achieving the inherently lawful ends of self-defense. See U.S. CONST. AMEND. II (providing that the ‘right of the people to keep and bear Arms, shall not be infringed.’).”

Here at Shockwave we worked tirelessly with U.S. Congressman Bilirakis, U.S. Congresswoman Anna Paulina Luna, and U.S. Senator Rick Scott to help overturn this rule through the power of the vote. While it won in the House, it did fail in the Senate.  So, it was back to the courts to help stop this overreach. Throughout the recent months there have been many injunctions set in place for Gun Owners of America, Second Amendment Foundation, FPC, and more. However, in order to be protected you would have needed to be named plaintiff or a member of one of these originations. With this new nationwide injunction from Judge Kasmaryk, that is no longer the case. All Americans are protected.

 

We are very thankful for all the hard work these 2nd amendment organizations do to help support companies like us and law abiding citizens who enjoy their 2nd amendment rights. So where do we go from here? Most certainly the Justice Department will appeal this ruling to the 5th Circuit Court of Appeals. The consensus among the legal community is that they will support the injunction relief and issue a permanent injunction in the coming months. As to the various lawsuits themselves? These will be a long endeavor and will likely take years to work through the legal system. Eventually, the U.S. Supreme Court will probably hear them. In the meantime, Americans will be protected by the injunctions.

Shockwave offers four different pistol stabilizers.

Pistol stabilizers improve the shooter’s safety and accuracy as the AR pistol is stabilized on their forearm for support.

Blade Stealth

Blade Classic

Blade 2M

Blade Pistol Stabilizer 

Why You Should Choose an AR-15 Pistol for a Home Defense Firearm

Let’s cut to the chase: The AR-15 pistol is one of the best firearms for home defense. 

 

Why? They’re affordable, reliable, accurate, and found everywhere. It’s no wonder the AR-15 is informally known as America’s 21st Century musket. And for good reason. 

 

When an intruder sees the easily recognized AR in your hands, they know you mean business. 

 

Learn about the evolution of the AR and AR pistol

 

But first, let’s dive into the benefits of using an AR-15 pistol for home defense. Each benefit is like a ripple effect — they all go hand in hand to make this firearm perfect for defense purposes. 



Benefits of an AR-15 Pistol for Home Defense

 

shockwave blade stealth ar-15 pistol

Affordable

 

You can find an AR-15 pistol to fit every budget: from just a few hundred dollars to the “sky is the limit.” The typical .223 ammunition is easily found in stores (when there’s not a global pandemic unfolding daily or nightly riots) and one of the least expensive ammos, with prices averaging about 32 cents per round. 

 

 

Low Recoiling

 

A low recoil makes the AR-15 pistol easy to shoot and a good option for beginners — even younger members of the family.

 

 

Accuracy

 

Because of such low recoil, accuracy is improved for most shooters.

 

 

Lightweight

 

At a mere 6 pounds — with ammo! — the AR-15 pistol is light enough for shooters of all ages and experiences. Because it has such a lightweight body, you can easily customize and add accessories to your firearm without making it too heavy to handle safely and accurately — especially in a home defense scenario. 

 

 

Ergonomically Designed

 

Many features of the AR-15 pistol are designed with ergonomics in mind, making this firearm comfortable and safe to shoot: pistol grip, trigger reach, safety location, forward handguard, sights, etc.

 

 

Ammo Capacity

 

A typical AR-15 pistol magazine holds 30 rounds of ammo. 

 

Many experts recommend using the .223 cartridge because it’s typically easy to find in stores,  inexpensive, and provides lower recoil. Some recommend using a 55-grain soft-point load that minimizes bullet penetration, which can be beneficial to protect your family in other parts of the home (or surrounding neighbors) in case the bullet misses the intended target. However, as you may know, the AR-15 is available in a multitude of calibers.

 

 

Size

 

During a home invasion, you don’t want to be turning corners and allow the intruder to discover your location before you know theirs. The AR-15 pistol is a great option for home defense due to its relatively short length, allowing you to turn corners discreetly and avoid disclosing your location that can put your defense game at risk. 

 

 

Customizable

 

From function to ergonomics to aesthetics, there are simply too many types of firearm accessories for customizing your AR-15 pistol than we can possibly cover here: grips, forearms, slings, sights, lights, lasers, scopes, red dot sights, triggers, muzzle devices, and so on. 

 

For home defense purposes, however, we recommend keeping it simple. Focus on the following accessories:

  • Brace, grip and/or sling: for better and safer control of your firearm
  • Flashlight: for better visibility in low-light conditions and stunning any intruders with the bright illumination
  • Red dot sight: for accuracy



A note about pistol braces:

 

Whether you’re building a custom AR-15 pistol or bought an AR-15 pistol without a brace, adding a brace can improve control and accuracy.

 

An AR-15 pistol cannot have a stock but it can have a brace, such as the Shockwave Blade and Shockwave Blade 2M. 





Shockwave AR-15 Pistol Accessories

 

Shockwave Technologies offers products to enhance your home defense use (and enjoyment) of your AR-15 firearms. Check out these Shockwave products compatible with AR-15 pistols.

 

 

Blade®

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 

 

 

Blade® 2M

 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

 

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 

Which Firearms are Compatible with Shockwave?

What makes Shockwave™ Technologies’ line of products so great is not only the unparalleled quality of the items, but that they’re also Made in America and veteran designed, engineered, marketed, and sold. Check out some of our popular product lines at Shockwave Technologies and experience the difference yourself. Find out which firearms are compatible with Shockwave below.

 

Shockwave™ Raptor™ Product Line

 

Raptor™ Grip 

Shockwave raptor grip
The unique angle of the Raptor™ Grip minimizes felt recoil, allowing maximum control shot after shot. Paired with the Raptor F1™ Forend, you gain a great hold on your firearm with their enhanced texture. The glass-filled polymer construction is virtually indestructible.The Raptor™ Grip is compatible with both 12-gauge and 20-gauge firearms with 18.5”, 20”, and longer barrels.

 

Our Raptor™ Grip 500/590 is compatible with:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20 gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

Our Raptor™ Grip 870 and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump 12-gauge
  • Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

Our Raptor Grip 870 for 20-gauge and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump 20-gauge
  • Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Our Raptor™ Grip 500E is compatible with:

  • Mossberg 500E .410 gauge firearms 
  • Mossberg 590E .410 gauge firearms



Raptor™ F1 Forend

Raptor™ F1 Forend
The cutting-edge design of the Shockwave Raptor™ F1 forend meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend.

 

Compatible with:

  • Mossberg 500 12-gauge
  • Mossberg 590 12-gauge
  • Mossberg 590 Shockwave 12-gauge
  • Remington 870 12-gauge
  • Remington Tac 14 12-gauge

 

Features include:

  • A total of 10 M-LOK® slots for mounting lights,vertical grips, angled grips, Picatinny rails, and more
  • The optional upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • Veteran designed



Raptor™ Forend Tool

Raptor™ Forend Tool

If you’ve ever tried to remove or install a forend nut on a pump-action shotgun, you know how frustrating that can be — and the potential damage to your gun. Whether the nut protrudes or is recessed, and no matter how long your magazine tube, you can now quickly and easily reach it. The nut tool works for all forends including the Streamlight TL-Racker forend. Replace your forend in under two minutes.

 

The Shockwave Technologies Raptor™ Forend Nut tool is made for Mossberg 500/590 and Remington 870 Forends. One side fits Mossberg 500/590, and the other Remington 870 and Hawk 982 12-gauge firearms.





Raptor™ Strap Kit

Raptor™ Strap Kit

The Raptor™ Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. It’s easy and quick to install in about 10 minutes. And it improves handling immensely!

 

The Raptor™ Strap is designed for the tactical forearm, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor™ Strap kit is compatible with:

  • Mossberg 500 forends
  • Mossberg 590 forends
  • Remington 870 forends
  • Magpul forends
  • Shockwave Raptor F1™ forends






Shockwave Blade® Product Line



Blade® 

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 








Blade® 2M 

Shockwave Blade® 2M 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 





Shockwave ZMAG™ Product Line

 

30 Round ZMAG™ and 50 Round ZMAG™

30 Round ZMAG™ and 50 Round ZMAG™

The design of the all-metal 30-round Shockwave ZMAG™ and 50-round Shockwave ZMAG™  for the Cobray/SWD M-11 (9mm and .380) is head and shoulders above the competition. 

 

The Shockwave ZMAG™ fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

Some exclusive features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch hole.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come. 

Top 5 Firearm Accessories for Home Defense

There’s nothing more intimidating than the sound of a shotgun pumping and gearing up for fire. For this reason, we’re all about using a shotgun in general for home defense — and that pump action can be scary enough to ward off an intruder before you have to take any necessary action to protect your household. But more specifically, we vouch for the Mossberg 590 Shockwave for the purpose of this topic.

 

The Mossberg 590 is considered a top home defense firearm across the web and we couldn’t agree more. With a shorter barrel than a traditional shotgun (which is typically used for hunting and clay shooting), you can get around corners and down the stairs more easily with a Mossberg 590 Shockwave. 

 

But the shotgun itself isn’t the only element needed to be prepared with the best home defense kit. Check out our top firearm accessories that you need for home and personal defense:

 

Shorty Shotshells

shorty shells with opsol mini clip

What is a shorty shotshell? A shorty shell (or mini shell) is a shotgun shell about half the length of a traditional shell, typically running at 1.75-inches long. They don’t blow a huge hole in the wall because they have a more narrow and targeted area of penetration. They also have less power and velocity (but enough of it to be a perfect fit for home defense). And lastly, you can fit more shorty shotshells in a tube meaning more rounds to ensure you don’t run out of ammo when a home intruder attempts to attack. 

 

When it comes to Shockwave, we believe buckshot shorty shells are the way to go.



Raptor Grip

Shockwave raptor grip

With the enhanced texture and ergonomic design of the Raptor™ Grip, you’ve never held onto your firearm with as much confidence and control for both safety and comfort. Its unique angle minimizes felt recoil, allowing for maximum control shot after shot. It’s also constructed with a glass-filled polymer, making it virtually indestructible. 

 

With less recoil, mini shells work great with the ergonomic design of the Raptor™ Grip. This is especially important for those who may be more recoil sensitive.

 

There are also new Raptor™ Grip colors available: black, FDE, OD green, and gray. 

 

Learn more about the Raptor™ Grip R870 and Raptor™ Grip M500/590.

 

OPSol Mini Clip

shockwave opsol mini clip

The OPSol Mini Clip only goes on Mossberg firearms and is specifically designed so that you can use short shells without jams. It allows you to easily install and uninstall in seconds to allow use of 1.75?, 2.75?, or 3? shells (as desired) with lower recoil for safe, easy, and comfortable aiming and discharging.





Flashlight Mount

shockwave flashlight mount

A GG&G flashlight mount for your Mossberg allows you to install a bright flashlight that will not only allow you to easily see where you’re going during the night and see your target, but the strong light can also stun your intruder, making it difficult for them to see you. Being in the bright spotlight will also make them feel exposed and more likely to run than to continue with their intrusion, knowing that they are a clear target of your shotgun. 

 

GG&G developed the Shockwave Flashlight Mount specifically for the Mossberg 590 Shockwave because its forend is a reconfigured version of Mossberg’s 590 foregrip. Our 590 flashlight mount which is similar, is a hair too close to the foregrip, so if you own one of the new Mossberg’s and need a flashlight mount, this is the one to get.

 

The GG&G Flashlight Mount for Mossberg 590 Shockwave:

 

  • Installs easily and is perfect for mounting a tactical flashlight to your Mossberg 590 Shockwave shotgun.
  • Manufactured specifically for the 12-gauge Shockwave (will not fit the 20-gauge Shockwave).
  • Designed, tested, and manufactured to withstand the rigors associated with professional use. It’s also been manufactured from bullet proof AS-35 Geneva steel and 6061-T6 billet aluminum.
  • Features an ambidextrous design that can be mounted on either side of the Mossberg Shockwave to accommodate both right- handed or left- handed shooters.
  • Offers dehorned edges (rounded, smoothed, and beveled) to protect the shooter.
  • Includes a Lifetime Warranty
  • Made in America by men and women proud to be Americans! 



Forend Strap

shockwave forend strapEnsuring you have a secure forend strap is an important safety feature that will protect yourself when in the heat of the moment of a surprise home invasion. A forend strap will keep a nervous, sweaty hand from slipping in front of your Mossberg 590 Shockwave shotgun and give you better control of your firearm to protect your loved ones. 

The Raptor Strap kit for the Mossberg 500 and 590 forends is designed for the tactical forearm image shown here, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. You can easily install this within 10 minutes using a drill, an 1/8” drill bit, and a Phillips-head screwdriver for installation.