Tag: shockwave blade

Pistol Stabilizers are BACK! | Federal Judge Blocks Nationwide Enforcement of the Pistol Brace Rule

Last Wednesday, Judge Matthew Kacsmaryk of the United States District Court in the Northern District of Texas granted injunction relief (an injunction) to prevent the ATF from enforcing the ATF’s Factoring Criteria for Firearms with Attached Stabilizing Braces rule-nationwide. What does this mean? In short, as far as pistol braces go, we’re back to 2021.

To obtain this injunction, the plaintiffs needed to satisfy four rules:

  1. They must be likely to prevail on the merits.
  2. They would suffer irreparable harm if denied.
  3. The injury outweighs any harm that would be caused if the injunction is granted.
  4. The public interest supports relief.

Judge Kacsmaryk also noted that the rule would cause horrendous strain on companies who produce stabilizing braces. “Additionally, ATF admits the 10-year cost of the Rule is over one billion dollars,” he wrote. “And because of the Rule, certain manufacturers that obtain most of their sales from stabilizing braces risk having to close their doors for good.” Here at Shockwave, we are very thankful for all the support our customers and 2nd amendment organizations have provided to help keep the fight going. We wouldn’t still be here without you.

In the ruling Judge Kacsmaryk stated,“[T]he Court is certainly sympathetic to ATF’s concerns over public safety in the wake of tragic mass shootings. The Rule ’embodies salutary policy goals meant to protect vulnerable people in our society,’” Judge Kacsmaryk wrote in Britto v. ATF. “But public safety concerns must be addressed in ways that are lawful. This Rule is not.”

There are two main items he noted in his ruling for injunctive relief:

  1. The ATF did not follow the Administrative Procedures Act (APA).  

He wrote, ‘[t]he controlling law of this case is that the Government Defendants’ promulgation of the Final Rule ‘fails the logical-outgrowth test and violates the APA’ and ‘therefore must be set aside as unlawful’ under the APA,’”

  • The ATF is violating the 2nd Amendment.

He added,“Absent injunctive relief, the Final Rule will impair and threaten to deprive them of their fundamental right to keep and bear commonly used arms as a means of achieving the inherently lawful ends of self-defense. See U.S. CONST. AMEND. II (providing that the ‘right of the people to keep and bear Arms, shall not be infringed.’).”

Here at Shockwave we worked tirelessly with U.S. Congressman Bilirakis, U.S. Congresswoman Anna Paulina Luna, and U.S. Senator Rick Scott to help overturn this rule through the power of the vote. While it won in the House, it did fail in the Senate.  So, it was back to the courts to help stop this overreach. Throughout the recent months there have been many injunctions set in place for Gun Owners of America, Second Amendment Foundation, FPC, and more. However, in order to be protected you would have needed to be named plaintiff or a member of one of these originations. With this new nationwide injunction from Judge Kasmaryk, that is no longer the case. All Americans are protected.

 

We are very thankful for all the hard work these 2nd amendment organizations do to help support companies like us and law abiding citizens who enjoy their 2nd amendment rights. So where do we go from here? Most certainly the Justice Department will appeal this ruling to the 5th Circuit Court of Appeals. The consensus among the legal community is that they will support the injunction relief and issue a permanent injunction in the coming months. As to the various lawsuits themselves? These will be a long endeavor and will likely take years to work through the legal system. Eventually, the U.S. Supreme Court will probably hear them. In the meantime, Americans will be protected by the injunctions.

Shockwave offers four different pistol stabilizers.

Pistol stabilizers improve the shooter’s safety and accuracy as the AR pistol is stabilized on their forearm for support.

Blade Stealth

Blade Classic

Blade 2M

Blade Pistol Stabilizer 

Shockwave Blade Classic and Blade Stealth Now Available in All Colors

The Shockwave Blade Stealth and Shockwave Blade Classic now come in all available colors — Black, FDE, OD Green, and Gray. 

These four colors of the Shockwave Blade are Made in America and allow you to customize your firearm to fit your personal style. 

 

Learn more about each Shockwave Blade® below:

 

Blade® Classic

shockwave blade classic

The veteran-designed Shockwave Blade® Classic pistol stabilizer is slightly smaller than the traditional Shockwave Blade®. 



Blade® Stealth

shockwave blade stealth

The Shockwave Blade® Stealth pistol stabilizer has a slick look and slightly smaller profile, making it an extremely comfortable brace for any user.

 

Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

  • Available in Black, FDE, OD Green, and Gray
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • Manufactured to exacting tolerances
  • Adjustable with a simple pull mechanism
  • Fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. 
  • Made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the simple, vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.

14 Gun Accessories to Add to Your Wish List

The Holiday Season has sneaked up on us all once again. But finding the perfect items to give your gun-loving family (or yourself) can be a difficult endeavor with the national shortage on firearm supplies due to high demand. 

 

Have no fear. 

 

Because Shockwave Technologies’ gun accessories are Made in America, we’ve been able to quickly fill the gaps for dealers and buyers who want to stock up on the best firearm supplies.

 

And that includes items to add to your Christmas wish list, too.  

 

If you’re looking for some awesome stocking stuffers or Christmas wish list ideas, check out these badass gun accessories for the gifts that keep on giving the whole year round:

 

 

Shockwave Blade®

 

Blade® Pistol Stabilizer 

Made from high-strength glass-reinforced polymer, the Blade pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25” in diameter) such as the Shockwave KAK Pistol Buffer Tube:

  • AR pattern
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Just slip it on and tighten the large set screw for a rock-solid installation.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install
  • Provides additional support during firing
  • Weighs a scant 5.0 ounces
  • ATF-approved for pistol use

 

 

Blade® 2M (Mil-Spec) 

With the same features as the Shockwave Blade pistol stabilizer, the Blade 2M adjusts with a simple finger lever. 

 

It’s compatible with all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install
  • Provides additional support during firing
  • Weighs a scant 4.0 ounces
  • ATF-approved for pistol use

 

 

 

NEW! Blade® Classic

The new, veteran-designed Shockwave Blade Classic pistol stabilizer takes a slightly smaller approach to the traditional signature Shockwave Blade look with all the new desirable features. 

 

It’s made from high-strength glass-reinforced polymer with a QD swivel mount (QD swivel not included). With the vertical-pull latch on the bottom of the Blade, you’ll be able to quickly adjust it to different lengths and gain more support, giving you a boost in safety, marksmanship, and comfort.

 

The Blade Classic pistol stabilizer fits all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

Features include:

  • Available in black (coming soon in FDE, ODG, and gray)
  • Ambidextrous side-mounted QDs for sling attachment
  • Quick and easy to install; just slip it on, and it locks in place
  • Provides additional support during firing

Weighs a scant 4.0 ounces 

 

 

NEW! Blade® Stealth

The Shockwave Blade Stealth pistol stabilizer is our very latest design. The new slick look and slightly smaller profile make it extremely comfortable for any user. The Blade Stealth is adjustable with a simple pull-down latch. 

 

Just like the Blade Classic, it’s also made from high-strength glass-reinforced polymer with a QD swivel mount (QD swivel not included) and fits all pistols equipped with a mil-spec buffer tube like the KAK Mil-Spec Carbine Buffer Tube:

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • And more

 

 

Features include:

  • Available in black (coming soon in FDE, ODG, and gray)
  • Ambi side-mounted QDs for sling attachment
  • Quick and easy to install; just slip it on, and it locks in place
  • Provides additional support during firing
  • Weighs a scant 4.0 ounces

 

 

 

Shockwave AR-15-Pattern Tubes 

 

 

KAK Shockwave Buffer Tube

The KAK Shockwave Buffer Tube is specifically designed for the Shockwave Blade Pistol Stabilizer, creating the world’s best pistol stabilizing system. 

 

With an anti-rotation and anti-thrust design, the Blade stays put without sliding forward or spinning. It’s flush with the rear of the Blade when it’s installed fully forward. When installed fully out, the assembly is incredibly rigid.

 

The Class 3 hard-anodized tube features 12 length-adjustment settings. It’s the same length as a KAK Mil-Spec Carbine Buffer Tube at 7.25 inches. 

 

The KAK Shockwave tube accepts all carbine buffer systems, mil-spec receiver endplates, and aftermarket endplates. 

 

 

KAK Mil-Spec Carbine Buffer Tube

With the same benefits of the KAK Shockwave Buffer Tube, the KAK Industry 6-position Mil-Spec Carbine Buffer Tube is compatible with the Blade 2M, Blade Classic, and Blade Stealth.

 

 

 

 

 

Shotgun Raptor™ Grip

 

With the enhanced texture and ergonomic design of the Raptor Grip, you’ve never been able to hold onto your firearm with as much confidence and control, improving both safety and comfort. Its unique angle minimizes felt recoil, allowing for maximum control shot after shot. It’s also constructed with a glass-filled polymer, making it virtually indestructible. 

 

There are also new Raptor Grip colors available: black, flat dark earth, OD green, and stealth gray. 

 

 

Raptor™ Grip 500/590

The Raptor Grip 500/590 fits:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20-gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

 

Raptor™ Grip 500E (.410) 

The Raptor Grip 500E (.410) / Raptor Grip M500E fits:

  • Mossberg 500E .410 gauge firearms (aka 500E)
  • Mossberg 590E .410 gauge firearms (aka 590E)

 

 

Raptor™ Grip 870

The Raptor Grip 870 fits:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

 

Raptor™ Grip 870 + 20-gauge Adapter

The Raptor Grip 870 fits:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Mesa Tactical’s 20-gauge to 12-gauge adapter is included in this package.  Simply attach it to the receiver in place of the standard 20-gauge stock. This cast steel adapter then enables you to attach the Raptor 12-gauge Remington 870 grip.

 

 

Raptor™ Grip 870 with QD

 

Raptor Grip 870 with a QD swivel fits:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

 

 

 

Shockwave Raptor™ F1™ Forend 

 

When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor™ F1™ forend. Its cutting-edge design improves handling and speeds target acquisition. A direct replacement for your factory or aftermarket forend, the Shockwave Raptor F1 is available as a standalone forend, with an optional upper heat shield, with an optional forend installation tool—or any combination thereof.

 

Features for all the Shockwave Raptor F1 forend include:

  • Rugged glass-reinforced polymer
  • Lightweight
  • Available in black, flat dark earth, OD green and stealth gray
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots allow for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Veteran designed
  • Made in the U.S.A.

 

 

Raptor F1 Forend for Mossberg 500/590

This Raptor F1 forend fits 12-gauge Mossberg 500/590 firearms with both lengths of slide action tubes (7-3/4” and 6-3/4”) thanks to the included adapter. 

 

 

 

Raptor F1 Forend for Mossberg 590/Shockwave 

This Raptor F1 forend fits 12-gauge Mossberg 590 firearms and Mossberg 590 Shockwave firearms, which feature a 6-3/4″ long slide action tube.

 

 

Raptor F1 Forend for Remington 870/TAC-14

This Raptor F1 forend fits 12-gauge Remington 870 firearms, including the TAC-14 featuring the Shockwave Technologies Raptor Grip.  

 

 



Whether you plan on adding some of these gun accessories to your own Christmas wish list or getting it for a fellow gun-lover, make sure you order by December 18, 2020 to ensure it arrives by Christmas!

Learn About the New Shockwave Blade Classic & Blade Stealth

Unsatisfied with the current pistol stabilizer options on the market, Shockwave Technologies released the game-changing Blade pistol stabilizer back in 2015. Since then, our products have only gotten better. 

 

As the Blade enthusiast population has rapidly grown the past several years, dealers, firearm manufacturers and DIY gun builders interested in pistol stabilizers have grown right there with it. This demand has allowed Shockwave to continue making advancements to these products to create the best-in-class pistol stabilizers on the market.

 

In 2020, Shockwave is excited to announce the all new Blade Classic and Blade Stealth.

 

Blade® Classic

shockwave blade classic pistol stabilizer

The new, veteran-designed Shockwave Blade® Classic pistol stabilizer takes a slightly smaller traditional and signature Shockwave Blade® look with all the new desired features. 

 

The Blade Classic pistol stabilizer is manufactured to exacting tolerances, adjustable with a simple pull mechanism, and fits all pistols equipped with a Mil-spec buffer tube: AR-15 pattern, MPX, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. It’s made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel not included). 

 

With the vertical pull mechanism on the bottom of the Blade, you’ll be able to adjust it to different lengths and gain more support, giving you a boost in your marksmanship game and more all-around comfort with each shot.  








Blade® Stealth

shockwave blade stealth pistol stabilizer

The Shockwave Blade® Stealth pistol stabilizer is our latest creation. The new slick look and slightly smaller profile makes it an extremely comfortable brace for any user. The Blade Stealth is adjustable with a simple pull mechanism. 

 

Just like the Blade Classic, it’s also made from high-strength glass-reinforced polymer with a QD swivel cup (QD swivel is not included) and fits all pistols equipped with a Mi-spec buffer tube.

 

Ultimately, both of the affordable Blade Classic and Blade Stealth pistol stabilizers remain lightweight, durable and thin with its robust design.



Shockwave Blade® Classic and Shockwave Blade® Stealth features include:

 

  • Available in Black (coming soon in FDE, ODG, and Gray)
  • Side quick disconnect for sling attachment on either side
  • Quick and easy to install. Just slip it on and it locks in place.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.



For dealer orders or packages please contact us at:

 

https://shockwavetechnologies.com/ffl-dealer-packages 

sales@shockwavetechnologies.com 

727-877-8277