Tag: mossberg 590 shockwave

How to Remove the Forend Nut on a Mossberg 500 or Remington 870

Say Goodbye to Stuck Nuts!

 

How many times has this happened to you? You want to clean your Mossberg 500 or Remington 870, but as you’re stripping it down, you find your forend nut is stuck? Or you don’t have the right tool? 

You end up making do with a hammer and punch, or other unsuitable combination of devices. But as you’re wailing away on your nut and trying to get it off, you end up doing some real damage to your gun. 

Next thing you know, you’ve now got to spend the cash to go see a professional for gun repair — and see if they can clean up the mess you’ve created.

Fret no more. 

Shockwave has you covered. Remove and replace your forend in under two minutes with the Shockwave Raptor Forend Nut Tool. Full 304 stainless steel construction, this handy dandy device is proudly made in the U.S.A. 

Being double-ended, one tool fits both Mossberg 500 and Remington 870 guns.

Extra long, the Shockwave Raptor Forend Nut Tool can reach the deepest of nuts on the longest of magazine tubes. Being stainless, it won’t rust like a carbon-steel tool or deform like a nylon or aluminum tool. That means you’re always assured of being able to get off the most stubborn nuts.

Just grasp the tool with your dominant hand, work it over the magazine tube and into your nut. Then just a twist to the left. Voila, your nut’s off. Reassembly is simply the reverse.

Need more leverage? A thin metal bar or even a screwdriver can be inserted through the hole in the end. On exceedingly long magazine tubes, a rubber strap wrench can often be employed with great success.

The Shockwave Raptor Forend Nut Tool features include:

  • Precision-machined in Dunedin, Florida
  • Manufactured from 304 stainless steel
  • Won’t rust like a carbon steel tool
  • Won’t deform like a nylon or aluminum tool
  • Remove the most stubborn forend nuts
  • Insert a bar or screwdriver through one of the provided holes for extra leverage
  • Over 4? long for reaching the deepest recessed nuts on the longest magazine tubes
  • No need to remove the magazine tube from your firearm
  • One side fits Mossberg 500 guns and the other Remington 870 and Hawk 982 guns
  • Fits 12-gauge guns with short, medium, long or even extra long magazine tubes 
  • Compatible with the Streamlight tactical forend.


Of course, safety first. Whenever cleaning your Mossberg 500 or Remington 870 (or any gun for that matter), you always want to make sure your chamber’s empty, as you wouldn’t want your gun to go off accidentally.

Which Firearms are Compatible with Shockwave?

What makes Shockwave™ Technologies’ line of products so great is not only the unparalleled quality of the items, but that they’re also Made in America and veteran designed, engineered, marketed, and sold. Check out some of our popular product lines at Shockwave Technologies and experience the difference yourself. Find out which firearms are compatible with Shockwave below.

 

Shockwave™ Raptor™ Product Line

 

Raptor™ Grip 

Shockwave raptor grip
The unique angle of the Raptor™ Grip minimizes felt recoil, allowing maximum control shot after shot. Paired with the Raptor F1™ Forend, you gain a great hold on your firearm with their enhanced texture. The glass-filled polymer construction is virtually indestructible.The Raptor™ Grip is compatible with both 12-gauge and 20-gauge firearms with 18.5”, 20”, and longer barrels.

 

Our Raptor™ Grip 500/590 is compatible with:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20 gauges)
  • Mossberg 590A1 and 500 Compact Cruiser AOW

 

Our Raptor™ Grip 870 and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump 12-gauge
  • Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

 

Our Raptor™ Grip 870 for 20-gauge and Raptor™ Grip for 870 with QD is compatible with:

  • Remington 870 20-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 20-gauge
  • Harrington & Richardson (H&R) Pardner Pump 20-gauge
  • Protector 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 20-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 20-gauge

 

Our Raptor™ Grip 500E is compatible with:

  • Mossberg 500E .410 gauge firearms 
  • Mossberg 590E .410 gauge firearms



Raptor™ F1 Forend

Raptor™ F1 Forend
The cutting-edge design of the Shockwave Raptor™ F1 forend meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend.

 

Compatible with:

  • Mossberg 500 12-gauge
  • Mossberg 590 12-gauge
  • Mossberg 590 Shockwave 12-gauge
  • Remington 870 12-gauge
  • Remington Tac 14 12-gauge

 

Features include:

  • A total of 10 M-LOK® slots for mounting lights,vertical grips, angled grips, Picatinny rails, and more
  • The optional upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • Veteran designed



Raptor™ Forend Tool

Raptor™ Forend Tool

If you’ve ever tried to remove or install a forend nut on a pump-action shotgun, you know how frustrating that can be — and the potential damage to your gun. Whether the nut protrudes or is recessed, and no matter how long your magazine tube, you can now quickly and easily reach it. The nut tool works for all forends including the Streamlight TL-Racker forend. Replace your forend in under two minutes.

 

The Shockwave Technologies Raptor™ Forend Nut tool is made for Mossberg 500/590 and Remington 870 Forends. One side fits Mossberg 500/590, and the other Remington 870 and Hawk 982 12-gauge firearms.





Raptor™ Strap Kit

Raptor™ Strap Kit

The Raptor™ Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. It’s easy and quick to install in about 10 minutes. And it improves handling immensely!

 

The Raptor™ Strap is designed for the tactical forearm, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

 

The Raptor™ Strap kit is compatible with:

  • Mossberg 500 forends
  • Mossberg 590 forends
  • Remington 870 forends
  • Magpul forends
  • Shockwave Raptor F1™ forends






Shockwave Blade® Product Line



Blade® 

 

Made from high-strength glass-reinforced polymer, the Blade® is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

 

Blade® fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25? in diameter) AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 5.0 ounces.
  • ATF approved for pistol use 








Blade® 2M 

Shockwave Blade® 2M 

Made from high-strength glass-reinforced polymer, the adjustable Blade® 2M pistol stabilizer is manufactured to exacting tolerances and fits all pistols equipped with a Mil-spec buffer tube. Just slip it on and lock in place.  Adjusts with a simple finger lever.

 

Compatible with all pistols equipped with a Mil-spec buffer tube: 

  • AR-15 pattern
  • MPX
  • Glock
  • CZ Scorpion Evo 3
  • HK9X pattern
  • etc.

 

Features include:

  • Available in black, flat dark earth, OD green, and stealth gray
  • Quick and easy to install.
  • Provides additional support during firing.
  • Weighs a scant 4.0 ounces.
  • ATF approved for pistol use 





Shockwave ZMAG™ Product Line

 

30 Round ZMAG™ and 50 Round ZMAG™

30 Round ZMAG™ and 50 Round ZMAG™

The design of the all-metal 30-round Shockwave ZMAG™ and 50-round Shockwave ZMAG™  for the Cobray/SWD M-11 (9mm and .380) is head and shoulders above the competition. 

 

The Shockwave ZMAG™ fits and functions in all M-11 guns that originally shipped with the Zytel magazines:

  • SWD M-11/NINE Submachine Gun (9mm)
  • SWD SM-11/NINE Semi-Auto Pistol (9mm)
  • SWD SM-11/NINE Semi-Auto Carbine (9mm)
  • SWD M11-A1 Submachine Gun (.380)
  • SWD SM-12/380 Semi-Auto Pistol (.380)
  • LEINAD / FMJ PM-11/NINE AWB-Compliant Semi-Auto Pistol (9mm)
  • LEINAD / FMJ PM-12/380 AWB-Compliant Semi-Auto Pistol (.380)
  • LEINAD CM-11/NINE AWB-Compliant Semi-Auto Carbine (9mm)
  • LEINAD TM-11/NINE AWB-Compliant Thompson-Style Semi-Auto Carbine (9mm)

 

Some exclusive features include:

 

  • Mag stop is a go/no-go feature in our opinion. It prevents over-inserting a mag into your gun and bending your ejector rod, which can quickly ruin your day at the range.
  • Robust, high-reliability feedlips are designed for optimal ammunition feeding. If you have a feedramp that’s out of spec, resolve your feeding issues once and for all with the super-reliable ZMAG.
  • Anti-tilt, low-friction polymer follower ensures the utmost in reliability.
  • Wolff spring improves feeding reliability.
  • Compatibility with the factory Cobray loader and the Butler Creek Uplula lets you easily load your ZMAGs.
  • Works with all stock designs, including the factory folding stock.
  • Ammo witness holes on the left side of the ZMAG allow you to see remaining ammo at a glance.
  • Optimally placed mag catch hole.
  • Rugged black Cerakote finish will protect your ZMAGs for decades to come.