Shockwave Men’s Tank Top
You rock. Shouldn’t your wardrobe, too? A Shockwave Tank Top shows you have good taste in firearms and fashion!
Sizes available from Men’s XSmall – 2XLarge
Shipping class: shipping rate by weight
Shipping by weight
Black Blade Pistol Stabilizer
We have a small number of Blades that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw on the top surface where the sprue was cut during production. We only have these in black.
Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.
This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black, flat dark earth, OD green, and stealth grey (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.
Thank you for your interest in our products.
ALL BLEMISHED PRODUCTS SALES ARE FINAL. No exchanges or refunds.
This shooting aid improves your marksmanship.
FDE Blade Pistol Stabilizer
We have a small number of Blades that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw on the top surface where the sprue was cut during production. We only have these in black.
Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.
This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black, flat dark earth, OD green, and stealth grey
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.
Thank you for your interest in our products.
ALL BLEMISHED PRODUCTS SALES ARE FINAL. No exchanges or refunds.
Shockwave Raptor™ F1 Forend for Mossberg 500/590
The Raptor F1 Forend / Mossberg 500 Forend designed by Shockwave Technologies is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Available in Black, FDE, OD Green and Gray
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms with 6 3/4 or 7 3/4 slide action tube
- Veteran designed
- Made in America
Firearm is not included.
**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P. **
Shockwave Raptor™ F1 Forend for Mossberg 590/Shockwave
The Shockwave Technologies Raptor F1 Forend is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Available in Black, FDE, OD Green and Gray
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 590 12-gauge firearms and Mossberg Shockwave 12-gauge firearms with a 6 3/4 slide action tube
- Veteran designed
- Made in America
Firearm is not included.
Got a 590M? You will need this version: Click here
Shockwave Raptor™ F1 Forend for Remington 870/Tac 14
The Shockwave Technologies Raptor F1 Forend is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in America
Firearm is not included.
Shockwave Raptor™ F1™ Forend for Mossberg 500/590 Kit
The Shockwave Technologies Raptor F1 Forend, Heat Shield and Forend nut tool is MADE IN AMERICA. With the forend enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof. This Kit includes the forend, heat shield, and forend wrench tool.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms with a 6 3/4 or a 7 3/4 slide action tube
- Veteran designed
- Made in U.S.A.
Firearm shown is not included, however.
**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P. **
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor™ F1™ Forend for Mossberg 590 / Shockwave Kit
The Shockwave Technologies Raptor F1 Forend, Heat Shield and Forend nut tool is MADE IN AMERICA. With the forend enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof. This Kit includes the forend, heat shield, and forend wrench tool.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Mossberg 590 12-gauge firearms and Mossberg Shockwave 12-gauge firearms with a 6 3/4 slide action tube
- Veteran designed
- Made in U.S.A.
Firearm shown is not included, however.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Got a 590M? You will need this version: Click here
Shockwave Raptor™ F1™ Forend for Mossberg 500/590 + Heat Shield
The Shockwave Technologies Raptor F1 Forend and Heat Shield is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms with a 6 3/4 or 7 3/4 slide action tube
- Veteran designed
- Made in U.S.A.
Firearm shown is not included, however.
**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P. **
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor F1 Forend for Mossberg 590/Shockwave + Heat Shield
The Shockwave Technologies Raptor F1 Forend and Heat Shield is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Available in Black, FDE, OD Green and Gray
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 590 12-gauge firearms and Mossberg Shockwave 590 12-gauge with a 6 3/4 slide acton tube
- Veteran designed
- Made in U.S.A.
Firearm is not included.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Got a 590M? You will need this version: Click here
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor™ Kit for Mossberg 500/590
The Shockwave Technologies Raptor Kit includes the Raptor Grip, Heat Shield and Forend nut tool, all MADE IN AMERICA. Its glass-filled polymer construction is virtually indestructible.
Forend Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Available in Black, FDE, OD Green and Gray
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms with a 6 3/4 or 7 3/4 slide action tube
- Veteran designed
- Made in U.S.A.
The Raptor Grip is available in Black, FDE, OD Green and Gray. It is molded of a super-tough glass-filled polymer.
Firearm shown is not included.
**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P.
The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.**
Shockwave Raptor™ Kit for Mossberg 590/Shockwave
The Shockwave Technologies Raptor Kit includes the Grip, F1 Forend, Heat Shield and Forend nut tool, all MADE IN AMERICA. Its glass-filled polymer construction is virtually indestructible.
Forend Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Available in Black, FDE, OD green, and Gray
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Mossberg 590 12-gauge firearms and Mossberg Shockwave 12-gauge firearms with a 6 3/4 slide action tube
- Veteran designed
- Made in U.S.A.
The Raptor Grip is available in Black, FDE, OD Green and Gray. Molded of a super-tough glass-filled polymer.
Firearm shown is not included, however.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Got a 590M? You will need this version: Click here
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor™ Kit for Remington 870/Tac 14
The Shockwave Technologies Raptor Kit includes our Raptor Grip, Raptor Forend, Heat Shield and Forend nut tool, all MADE IN AMERICA. Its glass-filled polymer construction is virtually indestructible.
Forend Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in America
The Raptor Grip is molded of a super-tough glass-filled polymer.
Firearm is not included.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor™ F1 Forend for Remington 870/Tac 14 + Heat Shield
The Shockwave Technologies Raptor F1 Forend and Heat Shield is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in America
Firearm is not included.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Shockwave Raptor™ F1 Forend for Remington 870/Tac 14 Kit
The Shockwave Technologies Raptor F1 Forend, Heat Shield and Forend nut tool is MADE IN AMERICA. With the forend enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.
When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof. This Kit includes the forend, heat shield, and forend wrench tool.
Features include:
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
- Includes forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in America
Firearm is not included.
*The Raptor F1 heat shield is not compatible with receiver-mounted rails
Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*
Recent Comments