Shipping class: shipping rate by weight

Shipping by weight

GG&G Remington 12GA 870 Tac 14 QD Rear Sling Attachment

Remington 12GA 870 Tac 14 QD Rear Sling Attachment

REMINGTON 870 TAC 14 QUICK DETACH REAR SLING ATTACHMENT:

The Remington TAC-14 12ga shotgun is an exciting and popular addition to the Remington shotgun lineup. It is short, compact and reliable. Shotgunners today like the tactical flexibility that a quick detach sling provides. GG&G has developed a solution for those shooters with the Remington TAC-14, The Remington TAC-14 Quick Detach Rear Sling Attachment. This QD rear sling attachment provides an excellent single point sling set up. The package is as rugged as the Remington 870 and of course it comes with the GG&G Lifetime Warranty.

REMINGTON 870 TAC-14 QD REAR SLING ATTACHMENT SPECIFICATIONS:

  • Compact and easy to install.
  • IMPORTANT: Unlike other similar products on the market, the GG&G Remington TAC-14 does not incorporate an attachment nut on the side opposite the sling swivel. GG&G uses a smooth button head cap screw as shown in the image above.
  • Complete installation instructions included.
  • No modification to shotgun required.
  • Designed and manufactured to withstand the rigors associated with professional use.
  • Ambidextrous.
  • Provides a side mounted QD sling mount.
  • Places the sling attachment out onto the receiver reducing the possibility of hand contact under recoil.
  • The 870 TAC-14 protrudes just .53 of an inch from face of receiver.
  • With just a push of the QD button, unsling your Remington TAC 14 shotgun for tactical flexibility.
  • Package includes two Delrin washers to protect both faces of the Remington 870 receiver.
  • Once installed, the button head is the only thing visible on the side of the receiver opposite the sling swivel.
  • Both the swivel cup and the screw are parkerized to closely match the receiver finish of your TAC-14.
  • All edges have been dehorned for shooters safety.
  • Material: Manufactured from tough 4140 steel.
  • Finish: Bead blasted and manganese phosphated in a non-reflective matte black finish per mil-spec.
  • Weight: 2 oz with the HD QD Sling Swivel installed.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

GG&G Remington 20GA 870 Tac 14 QD Rear Sling Attachment

Remington 20GA 870 Tac 14 QD Rear Sling Attachment

REMINGTON 870 20GA TAC 14 QUICK DETACH REAR SLING ATTACHMENT:

The Remington TAC-14 20ga shotgun is becoming a popular addition to the Remington shotgun lineup. It is short, compact and reliable as is its 12ga big brother. . Because shotgunners today like the tactical flexibility that a quick detach sling provides, GG&G has developed a solution for those shooters with the Remington 20ga TAC-14, The Remington 20ga TAC-14 Quick Detach Rear Sling Attachment. This QD rear sling attachment provides an excellent single point sling set up. The package is rugged and of course it comes with the GG&G Lifetime Warranty.

REMINGTON 870 20GA TAC-14 QD REAR SLING ATTACHMENT SPECIFICATIONS:

  • Manufactured specifically for the 20ga TAC-14.
  • Compact and easy to install.
  • IMPORTANT: Unlike other similar products on the market, the GG&G Remington 20ga Tac-14 QD Attachment does not incorporate an attachment nut on the side opposite the sling swivel. GG&G uses a smooth button head cap screw as shown in the image above.
  • Complete installation instructions included.
  • No modification to shotgun required.
  • Designed and manufactured to withstand the rigors associated with professional use.
  • Ambidextrous.
  • Provides a side mounted QD sling mount.
  • Places the sling attachment out onto the receiver reducing the possibility of hand contact under recoil.
  • The 20ga 870 TAC 14 protrudes just .53 of an inch from face of receiver.
  • With just a push of the QD button, unsling your Remington 20ga shotgun for tactical flexibility.
  • Package includes two Delrin washers to protect both faces of the Remington 870 receiver.
  • Once installed, the button head is the only thing visible on the side of the receiver opposite the sling swivel.
  • Both the swivel cup and the screw are parkerized to closely match the receiver finish of your TAC-14.
  • All edges have been dehorned for shooters safety.
  • Material: Manufactured from tough 4140 steel.
  • Finish: Bead blasted and manganese phosphated in a non-reflective matte black finish per mil-spec.
  • Weight: 2 oz with the HD QD Sling Swivel installed.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

Raptor F1 Forend Heat Shield

Shockwave Raptor™ F1 Forend Heat Shield

The Shockwave Technologies Raptor F1 Forend Heat Shield is MADE IN AMERICA. Its glass-filled polymer construction is virtually indestructible. Designed to fit the Shockwave Raptor Forend for Mossberg 500/590 and Raptor Forend for Remington 870

Features include:

  • Rugged glass-reinforced polymer
  • Lightweight
  • Available in Black, FDE, OD Green and Gray
  • Extra length lets you personalize forward handhold
  • M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Veteran designed
  • Made in America

Firearm is not included.

*The Raptor F1 heat shield is not compatible with receiver-mounted rails 

Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.*

Remington Grip Hardware

Remington 870 Raptor Grip Hardware

Did you lose your Raptor Grip Remington 870 mounting hardware? Replace it with this set of 1/4”-28 x 4” SHCS, 1/4” lock washer and flat washer.

Remington Strap Hardware

Remington 870 Raptor Strap Hardware

Did you lose your Raptor Strap Remington 870 mounting hardware? Replace it with this set of four #8 x 3/8” thread-forming screws and four #8 flat washers.

Raptor Grip Plug for 500/590

Raptor Grip Plug 500/590

Did you lose the bolt hole plug for your Raptor Grip Mossberg 500, Mossberg 590 or Mossberg Shockwave? Replace it with this factory part. Note: This Gen 2 plug won’t fit older Gen 1 grips.

Mossberg Grip Hardware

Mossberg 500 Raptor Grip Hardware

Did you lose your Raptor Grip Mossberg 500 mounting hardware? Replace it with this set of 5/16”-18 x 4” SHCS, 5/16” lock washer and flat washer.

 

Mossberg Strap Hardware

Mossberg 500 Strap Hardware

Did you lose your Raptor Strap Mossberg 500 mounting hardware? Replace it with this set of four #8 x 3/8” thread-forming screws and four #8 flat washers.

Blemished Raptor Grip 500/590

Raptor Grip 500/590

We have a small number of grips that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw.  They may also be missing the plug.

The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip, aka witness protection grip, aka chicken head grip, aka border patrol grip, aka entry-style grip, aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

The Raptor Grip is molded of a super-tough glass-filled polymer and fits:

  • Mossberg 500 12-gauge firearms (aka 500A)
  • Mossberg 500 20-gauge firearms (aka 500C)
  • Mossberg 590 and 590A1 firearms (12-gauge)
  • Mossberg 510 Mini firearms (12- and 20-gauges)
  • Mossberg 835 firearms (12- and 20-gauges)
  • Mossberg 535 firearms (12- and 20-gauges)
  • Mossberg 600 (New Haven) firearms (12- and 20-gauges)
  • Maverick 88 (12- and 20-gauges)
  • Coast to Coast model CC 660 Master Mag (12- and 20-gauges)

Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.) Order yours today!

Firearm shown is not included, however.

*Note that a pistol-grip-only Mossberg/Maverick 12-gauge with a 14″ barrel and the Raptor Grip installed measures 26.5″ in overall length (measured parallel to the bore). The grip itself adds 5.25″ to the length of the weapon (measured parallel to the bore). Of course, the Raptor Grip also fits 12-gauges and 20-gauges with 18.5″, 20″, and longer barrels.

**Note that there is no predefined hole for a sling swivel stud on the Raptor Grip. This allows you to put your sling swivel wherever you want it on the grip–not just where we think it should go. Be sure to drill a 1/8″ pilot hole.

ALL BLEMISHED PRODUCTS SALES ARE FINAL.  No exchanges or refunds.

Blemished Raptor Grip 870

Raptor Grip 870

We have a small number of grips that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw. They may also be missing the plug.

The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

The Raptor Grip is molded of a super-tough glass-filled polymer and fits:

  • Remington 870 12-gauge firearms
  • New England Firearms (NEF) Pardner Pump Protector 12-gauge
  • Harrington & Richardson (H&R) Pardner Pump Protector 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 98 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 982 12-gauge
  • Interstate Arms Corp (IAC) Hawk Model 981R 12-gauge

Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Order yours today. Yes, mounting hardware is included. (Requires a 3/16” hex wrench for installation, which is not included.)

Firearm shown is not included.

*Note that a pistol-grip-only Remington 870 firearm with a 14” barrel and the Raptor Grip installed measures 26.5” in overall length (measured parallel to the bore). The grip itself adds 5.5” to the length of the weapon (measured parallel to the bore).

Of course, the Raptor grip also fits 12-gauges with 18.5”, 20”, and longer barrels.

 

*Note that there is no predefined hole for a sling swivel stud on the Raptor Grip. This allows you to put your sling swivel wherever you want it on the grip—not just where we think it should go. Just drill a 1/8” pilot hole, and thread in your sling swivel stud.

ALL BLEMISHED PRODUCTS SALES ARE FINAL.  No exchanges or refunds.

Shockwave Tank Top

Shockwave Men’s Tank Top

You rock. Shouldn’t your wardrobe, too? A Shockwave Tank Top shows you have good taste in firearms and fashion!

Sizes available from Men’s XSmall – 2XLarge

Blemished Black Shockwave Blade Pistol Stabilizer

Black Blade Pistol Stabilizer

We have a small number of Blades that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw on the top surface where the sprue was cut during production. We only have these in black.

Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black, flat dark earth, OD green, and stealth grey (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use 
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

Thank you for your interest in our products.

 

ALL BLEMISHED PRODUCTS SALES ARE FINAL.  No exchanges or refunds.
This shooting aid improves your marksmanship.

Blemished FDE Shockwave Blade Pistol Stabilizer

FDE Blade Pistol Stabilizer

We have a small number of Blades that just “didn’t make the cut” with the QC department. But they’re still very usable. Most of these “factory seconds” have a small flaw on the top surface where the sprue was cut during production. We only have these in black.

Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black, flat dark earth, OD green, and stealth grey
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use 
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

Thank you for your interest in our products.

ALL BLEMISHED PRODUCTS SALES ARE FINAL.  No exchanges or refunds.

Raptor F1 Forend for Mossberg 500/590

Shockwave Raptor™ F1 Forend for Mossberg 500/590

The Raptor F1 Forend / Mossberg 500 Forend designed by Shockwave Technologies is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible.

When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

Features include:

  • Rugged glass-reinforced polymer
  • Lightweight
  • Available in Black, FDE, OD Green and Gray
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms with 6 3/4 or 7 3/4 slide action tube
  • Veteran designed
  • Made in America

Firearm is not included.

Installation instructions

**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P. **