Shipping class: shipping rate by weight

Shipping by weight

Raptor Forend Nut Tool 500/870 20 gauge

Raptor™ Forend Nut Tool 500/870 20 gauge

The Shockwave Technologies Raptor Forend Nut tool for Mossberg 500 forend and Remington 870 forend is MADE IN AMERICA. Extra long for easy installation or removal for Mossberg 500, Remington 870 and Hawk 982  20 gauge forends.  

If you’ve ever tried to remove or install a forend nut on a pump-action shotgun using only a drift punch or flat bladed screwdriver and a mallet, you know how frustrating that can be—and the potential for damage to your gun. Whether the nut protrudes or is deeply recessed, and no matter how long your magazine tube is, now you can quickly, easily reach it with the Shockwave Raptor Forend Nut Tool. Remove and replace your forend in under two minutes.

  • Precision-machined in Bountiful, Utah
  • Manufactured from 304 stainless steel
  • Won’t rust like a carbon steel tool
  • Won’t deform like a nylon or aluminum tool
  • Remove the most stubborn forend nuts
  • Insert a bar or screwdriver through one of the provided holes for extra leverage
  • Over 4″ long for reaching the deepest recessed nuts on the longest magazine tubes
  • No need to remove the magazine tube from your firearm
  • One side fits Mossberg 500 guns and the other Remington 870, Hawk 982 guns and Browning BPS 20 gauges
  • Fits 20-gauge guns with short, medium, long or even extra long magazine tubes 

Raptor Strap Kit 500/590 Forend

Raptor™ Strap Kit 500/590 Forend

Raptor Strap kit for the Mossberg 500 and 590 forends.

Designed for the tactical forearm shown, but will also fit the standard handguard. It will also fit other shotgun models from other manufacturers.

The Raptor Strap kit includes the strap, attachment hardware, and detailed instructions with full-size template. (Forearm pictured is not included–just the forearm strap kit.)

Easy to install. Takes about 10 minutes. Improves handling immensely!

Requires a drill with an 1/8” drill bit and a Phillips head screwdriver for installation.

Raptor F1 Forend for Mossberg Shockwave

Raptor™

F1 Forend for Mossberg Shockwave

The Shockwave Technologies Raptor F1 Forend for Mossberg Shockwave includes options to add the Raptor Grip, Heat Shield and Forend nut tool, all MADE IN AMERICA. Its strong nylon construction is virtually indestructible.

Forend Features include:

  • Rugged nylon construction
  • Lightweight
  • Available in Black, FDE, OD Green and Gray
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Options include the forend wrench to simplify and speed installation
  • Compatible with Mossberg Shockwave 12-gauge firearms with a 6 3/4 slide action tube
  • Veteran designed
  • Made in U.S.A.

The Raptor Grip is available in Black, FDE, OD Green and Gray. It is molded of a super-tough glass-filled polymer.

Installation instructions

Firearm shown is not included.

The Raptor F1 heat shield is not compatible with receiver-mounted rails 

Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.**

Raptor F1 Forend for Mossberg 500 and 590

Raptor™

F1 Forend for Mossberg 500 and 590 

The Shockwave Technologies Raptor F1 Forend for Mossberg 500 and 590 includes options to add the Raptor Grip, Heat Shield and Forend nut tool, all MADE IN AMERICA. Its strong nylon construction is virtually indestructible.

Forend Features include:

  • Rugged nylon construction
  • Lightweight
  • Available in Black, FDE, OD Green and Gray
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Includes the upper heat shield to prevents burns and offers rifle sights for fast target acquisition
  • Options include the forend wrench to simplify and speed installation
  • Compatible with Mossberg 500/590 12-gauge firearms with a 6 3/4 or 7 3/4 slide action tube
  • Veteran designed
  • Made in U.S.A.

The Raptor Grip is available in Black, FDE, OD Green and Gray. It is molded of a super-tough glass-filled polymer.

Installation instructions

Firearm shown is not included.

**FOR MOSSBERG MAVERICK 88 and MOSSBERG 500 Cruiser / Persuader with a pinned forend will require you to change the action slide and tube with Mossberg part number 11603P.

The Raptor F1 heat shield is not compatible with receiver-mounted rails 

Be sure to closely check fit, function, and clearance — many receiver-mounted accessories are NOT compatible with the Raptor F1.**

OpSol Mini Clip

OpSol Mini Clip

  • The OpSol Mini Clip lets you practice with less-expensive, lower-recoil Aguila 12-gauge 1.75″ birdshot, buckshot, and slug shells.
  • Fits 12-gauge Mossberg 500, 590, 590A1, and Maverick 88 models.
  • Easily installs and uninstalls in seconds to allow use of 1.75″, 2.75″, or 3″ shells as desired.
  • Benefits users of pistol grip only firearms with lower recoil for safe, easy, and comfortable aiming and discharging.
  • Secures in the host firearm well, but can also be taped in with electrical tape for close contact or heavy foliage environments.

Barracuda Barrel Nut Wrench

Barracuda™ Barrel Nut Wrench

The Shockwave Technologies Barracuda™ barrel nut wrench for Savage Axis, Axis II, Model 10, Model 110, and Model 12 is MADE IN AMERICA. Compact, lightweight, and corrosion-resistant, this 3/16”-thick stainless steel wrench provides for quick, easy installation and removal of barrel nuts on long-action and short-action receivers.

If you’ve ever tried to remove or install a barrel nut on a Savage Axis rifle using only a drift punch and a mallet or a repurposed tool that doesn’t quite fit, you know how frustrating that can be—and the potential for damage to your firearm.

Whether your action is on or off of the stock, now you can quickly and easily install, tighten, loosen, or remove the nut with the Shockwave Barracuda barrel nut wrench.

  • Precision-machined in Dunedin, Florida
  • Manufactured from 304 stainless steel
  • Won’t rust like a carbon steel tool
  • Won’t deform like a nylon or aluminum tool
  • Remove the most stubborn barrel nuts
  • No need to remove the action from your firearm
  • 1/2″ square cutouts let you use a torque wrench for precise tightening
  • 5/16” cutout allows for tightening sling swivel studs
  • Handy cutout for popping open your favorite beverage
  • Fits barrel nuts for Savage Axis, Axis II, Model 10, Model 110, and Model 12 
  • Made in the U.S.A.
  • Veteran designed

GG&G Quick Detach Sling Swivel

Quick Detach Sling Swivel

HEAVY DUTY QUICK DETACH SLING SWIVEL WITH ENHANCED QD RELEASE BUTTON SPECIFICATIONS:
  • Heavy duty components.
  • Large recessed QD release button.
  • QD Release button has custom CNC machined concentric tactile grooves for more precise and more positive finger or thumb placement.
  • Heavy duty sling retention wire will accommodate webbing up to 1 1/4″.
  • Manganese phosphated matte black finish per mil-spec.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!

GG&G Quick Detach Angular Sling Swivel

Quick Detach Angular Sling Swivel

HEAVY DUTY QUICK DETACH SLING SWIVEL WITH ENHANCED QD RELEASE BUTTON AND ANGULAR SLING ATTACHMENT SPECIFICATIONS:
  • Heavy duty components.
  • Large recessed QD release button.
  • QD Release button has custom CNC machined tactile grooves for more precise and more positive finger or thumb placement.
  • Heavy duty sling retention wire is angular shaped in order to place the HK style quick clips or mash hooks in the optimum position.
  • Manganese phosphated matte black finish per mil-spec.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!

GG&G Mossberg 590 Follower

Mossberg 590 Follower

Mossberg 590 Shotgun Shooters want the best for their shotguns. The Standard Mossberg 590 follower does not offer the upgraded features tactical shooters are looking for. It’s one of the first 590 shotgun components to be upgraded. The GG&G Mossberg 590 Follower for 12 ga. shotguns is an enhanced follower manufactured with the Mossberg Tactical Shotgun Shooter in mind.

Specifications:

  • Installs just like the factory 590 follower. No modification to the shotgun is required.
  • Material: The GG&G Mossberg Follower is manufactured from stainless steel for corrosion and wear resistance. The stainless steel body provides smooth operation and resists galling and contaminants imbedding into the body of the follower. These are the two major contributors to aftermarket followers malfunctioning.
  • Material: The high visibility red insert is aluminum and is manufactured so that you cannot only quickly see that the magazine tube is empty, but in low light conditions, feel the difference between the face of the follower and the rear of a shotgun shell.
  • The follower is manufactured with a deep spring pocket to better control spring movement.
  • Weight: .6 oz.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans.

GG&G Mossberg 500/590 Scope Mount

Mossberg 500/590 Scope Mount

The GG&G one piece Mossberg 500/590 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Mossberg 500 and 590 shotguns. The design of the Mossberg 500/590 Scope Rail provides that low-profile factory look.

MOSSBERG 500 SCOPE MOUNT AND 590 SCOPE MOUNT SPECIFICATIONS:
  • Low profile design.
  • MIL-STD-1913 configuration.
  • Perfect for mounting a tactical scope to your Mossberg 500 and Mossberg 590 shotguns.
  • Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads.
  • Attaches with four steel Torx head screws. Torx wrench is included.
  • Precision machined from 6061-T6 billet aluminum.
  • All edges are smoothed and rounded for the shooter’s safety.
  • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
  • Length: 5.9″ long.
  • Weight: 1.4 oz.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!

GG&G Mossberg 500/590 Red Dot Scope Mount

MOSSBERG 500/590 RED DOT SCOPE MOUNT – PER RMR FOOTPRINT SPEC

MOSSBERG 500/590 RED DOT SCOPE MOUNT:

The Mossberg 500 and 590 Shotguns are being equipped with Red Dot Optics like the Trijicon RMR. Red Dot Optics are an extremely popular tactical accessory for the Mossberg shotguns. The GG&G Mossberg 500 and 590 Low Profile Red Dot Optic Mount has the RMR fitment or attachment layout. However, the 500/590 Red Dot Scope Base fits approximately 20 other red dot optics, but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.

The Mossberg 500 and 590 Red Dot Mount is a rock solid low profile mount. It is CNC machined to precise tolerance and has a rock solid engagement with the top of the 500 and 590 receiver and with the red dot optic. The Red Dot Scope Mount coupled with the RMR Red Dot Scope, provides a rugged and accurate quick target acquisition package.

 

MOSSBERG 500/590 RED DOT SCOPE MOUNT SPECIFICATIONS:
  • Does not require any modifications to your Mossberg 500 or 590.
  • The Mossberg 500/590 Red Dot Scope Mount is easy to install using factory drilled and tapped mounting holes.
  • Includes mounting hardware for the 500 and 590 Scope Mount and hardware specifically for mounting the Trijicon RMR to the scope mount.
  • Hex key wrenches are included.
  • The Mossberg Red Dot Scope base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.
  • Red Dot Fitment List: Trijicon RMR / Trijicon SRO / Holosun 407C / Holosun 407C V2 / Holosun 407C X2 / Holosun 507C / Holosun 507C V2 / Holosun 507C X2 / Holosun 508T / Holosun 508T X2 /Riton X3 Tactix PRD/ NcStar VISM FlipDot Pro / ADE Advanced Optics RD3-020 Raptor / ADE Advanced Optics RD3-023 Valkyrie / Swampox Kingslayer 1×22 / Swampfox Liberty RMR 1×22 / Swampfox Justice RMR 1×27 / Vector Optics Frenzy 1x22x26.
  • All edges are deburred for the shooter’s safety.
  • Rounded edges provide a snag free operation.
  • Material: The Mossberg 500/590 Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
  • Length: 1.800″
  • Width: 1.100″
  • Thickness: 2.10″
  • Body Finish: Matte black Type III hard coat anodized per Mil-Spec. to protect it from the elements.
  • Weight: 0.5 oz.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

  • IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Mossberg 500/590 Red Dot Scope Mount. A fitment list is provided in the Specification section.

    Please be advised that the screws that are included with the GG&G Red Dot Mount are specific to mounting the RMR and may be too long for mounting other red dot optics. For example three Holosun Mini Red Dot Scopes, models 407, 507 and 508 have the same attachment screw layout as the Trijicon RMR. However, BE ADVISED: The screws that come with the GG&G Mossberg 500/590 RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver!

    Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR!  PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR.

GG&G Mossberg 500/590 Red Dot Scope Mount Burris Fastfire 3 and 4 Footprint

MOSSBERG 500/590 RED DOT SCOPE MOUNT – Burris Fastfire 3 and 4 Footprint

MOSSBERG 500 AND 590 RED DOT SCOPE MOUNT-BURRIS FASTFIRE FOOTPRINT

The Burris FastFire 3 and FastFire 4 mini red dots offer quick target acquisition for shotguns like the Mossberg 500/590 shotgun. The GG&G Mossberg FastFire Red Dot Optic Mount has the fitment or attachment layout of the Burris FastFire 3 and FastFire 4 Red Dot Optic and 5 other red dots that have the same footprint, but please beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the FastFire 3 and 4 optics on the Mossberg 500 / 590 shotgun

The 590 Red Dot Mount is low profile and CNC machined to easily mount to the Mossberg 500/590 receiver. This low profile mount provides rock solid engagement with the top of the 500/590 receiver and the red dot scope. The Mossberg 500 and 590 Red Dot Scope Mount coupled with either the Burris FastFire 3 or FastFire 4 Red Dot Scope or any of the red dots having the same footprint, provide a rugged and accurate quick target acquisition package.
 

MOSSBERG 500 / 590 RED DOT SCOPE MOUNT WITH BURRIS FASTFIRE FOOTPRINT SPECIFICATIONS:
  • No permanent modifications required to your Mossberg 500 or Mossberg 590 Shotgun, except removal of the standard dovetail scope mount if equipped with one.
  • The 500/590 Red Dot Scope Mount For FastFire’s is easy to install using factory drilled and tapped mounting holes.
  • Includes mounting hardware for mounting the FastFire 3 and 4 Scope Mount to the Mossberg receiver and hardware specifically for mounting the Burris FastFire 3 and 4 to the scope mount.
  • Hex key wrenches are included.
  • The Mossberg 500/590 Red Dot Scope FastFire base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Burris FastFire 3 and 4 optics.
  • Red Dot Fitment List: Primary Arms SLX RS-10, SightMark Mini Shot M-Spec and Mini Shot Pro Spec, Vortex Venom, Vortex Viper.
  • All edges are deburred for the shooter’s safety.
  • Rounded edges provide a snag free operation.
  • Material: The Mossberg Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
  • Length: 1.965″.
  • Width:  1″.
  • Thickness: .250″.
  • Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements.
  • Weight: 0.5 oz.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

  • IMPORTANT NOTICE! Although we include mounting screws for the Burris FastFire 3 and FastFire 4 red dot optics, there are approximately 5 other Micro Red Dot Optics that fit this GG&G Mossberg 500/590 Red Dot Scope Mount. A fitment list is provided in the Specification section below.

    Please be advised that the screws that are included with this GG&G Red Dot Mount are specific to mounting the FastFire 3 and 4 and may be too long for mounting other red dot optics. If you attempt to mount any of the optics listed below or others not specifically listed without verifying screw lengths, you may dimple the top of the receiver!

    Ensure you have the proper length screws prior to installing any other optic than the Burris FastFire 3 and FastFire4!  PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR.

GG&G Mossberg Shockwave 5 Shot Side Saddle

GG&G Mossberg Shockwave Side Saddle (5 Shot)

The GG&G Mossberg Shockwave Side Saddle Shell Holder (5 Shot) provides quick access to your ammunition at an angle that matches your hand. It facilitates loading the mag tube and the chamber. Check out all of our Shockwave Accessories HERE.

Important Consideration: Unlike other shotgun side saddle shell holders, the GG&G Side Saddle utilizes a solid rubber tube shell retainer versus a rubber tube shell retainer with side walls. The Reason? The rubber tube type shell retained easily distorts from heat and continuous pressure of the shotgun shell. Over time the shell becomes loose in the shell holder. The GG&G solid shell retainer with a speced durometer reading, retains its form resulting in a tight fit that you can count on for years of use.

Specifications:

  • As easy to install as changing a car tire.
  • Manufactured specifically for the Shockwave 12 gauge. Will not fit the 20ga Shockwave.
  • No modifications are required to the weapon for installation.
  • Mounts solidly to receiver using provided steel trigger pin replacement bolts.
  • Non-marring backing plate will not damage the receiver’s finish. The backing plate is cut out to view weapon’s serial number. The Mossberg Side Saddle holds 12ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.
  • Shotshells can be retained in base up or base down position depending on shooter’s style of reloading.
  • The Shockwave Side Saddle features a durable, oil resistant, replaceable shotshell retention system.
  • Manufactured from 6061 T-6 aluminum.
  • Type III hard anodized black per mil-spec.
  • Ergonomic design including lightning cuts for weight reduction.
  • Weight: 5.5 oz
  • Overall Length: 6.5″
  • All edges have been rounded for the shooter’s safety.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!

GG&G Mossberg Shockwave Flashlight Mount

Mossberg Flashlight Mount

GG&G developed the Mossberg Flashlight Mount specifically for the Shockwave because the foregrip of the Mossberg Shockwave is a reconfigured version of Mossberg 590 foregrip.

Our Mossberg 590 flashlight mount which is similar, is a hair too close to the foregrip, so if you own one of the new Mossberg’s and need a flashlight mount, this is the one to get!

Specifications:

  • Installs easily.
  • Manufactured specifically for the Shockwave 12ga. Will not fit the Shockwave 20ga.
  • Designed, tested and manufactured to withstand the rigors associated with professional use.
  • Ambidextrous Design. Can be mounted on either side of the Mossberg Shockwave to accommodate both right handed or left handed shooters.
  • The MIL-STD-1913 accessory rail can be positioned facing forward or rearward.
  • Perfect for mounting a tactical flashlight to your Mossberg Shockwave shotgun.
  • All edges have been rounded, smoothed and beveled to protect the shooter.
  • Length: Accessory rail measures 1 3/4″ long.
  • Material: Manufactured from bullet proof AS-35 Geneva steel and 6061-T6 billet aluminum.
  • Finish: Steel components are manganese phosphated in a non-reflective matte black combat finish per Mil-Spec.
  • Finish: Aluminum components are Type III hard coat anodized per Mil-Spec.
  • Weight 1.3 oz.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!

GG&G M-LOK Looped Sling Attachment

M-LOK Looped Sling Attachment

M-LOK LOOPED SLING ATTACHMENT:

GG&G is now manufacturing an “All Steel” M-LOK Looped Sling Attachment for all long guns, short guns and shotguns equipped with M-LOK forearms and shotguns with M-LOK Barrel Clamps.

This looped sling attachment is great for those shooters who prefer to have a looped sling attachment that may not be as quick to release as the button style quick detach versions, but is prefered by many shooters. The M-LOK Looped Sling Attachment accommodates slings with MASH Hooks and HK style snap hooks.

 

M-LOK LOOPED SLING ATTACHMENT SPECIFICATIONS:
  • Easily installs on M-LOK forearms and M-LOK Shotgun Barrel Clamps.
  • No-Snag design.
  • Obviously it’s ambidextrous.
  • Fits all M-LOK slots that are per Magpul’s M-LOK dimensions.
  • The M-LOK Looped Sling Attachment accommodates slings with MASH Hooks and HK style snap hooks.
  • Uses top of the line Magpul factory T Nuts.
  • Keeps the firearm slung in the correct position to avoid canting outwards away from your body.
  • All edges have been deburred and rounded to protect the shooter.
  • Materials: Manufactured from tough 12L14 steel.
  • Finish – Steel Components: Manganese phosphated matte black per Mil-Spec.
  • Weight: 0.75 oz.
  • Warranty: Lifetime.
  • Made In American By Men And Women Proud To Be Americans!

GG&G Mossberg 500/590 Rear Quick Detach Sling Attachment

Mossberg 500/590 Rear Quick Detach Sling Attachment

MOSSBERG 500 QD REAR SLING ATTACHMENT:
  • Compact and easy to install.
  • Will fit the Mossberg 500/590 shotgun and Mossberg Maverick 88.
  • Designed and manufactured to withstand the rigors associated with professional use.
  • Can be used with a two point sling set up or as a single point sling attachment.
  • When used as a 500/590 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to “cut the pie” at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator’s position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
  • Provides a QD rear side sling mount for the Mossberg 500/590.
  • With just a push of the QD button, unsling your Mossberg 500/590 shotgun for tactical flexibility.
  • Available With Or Without Enhanced Heavy Duty Quick Detach Rectangular Or Angular Sling Swivels
  • The Mossberg 500/590 Quick Detach Rear Sling Attachment includes the Limited Rotation Sling Swivel feature to help eliminate sling wrap up.
  • All edges have been dehorned for shooters safety.
  • Material: Manufactured from solid billet 6061 T-6 aluminum.
  • Finish: Bead blasted and Type III hard anodized in matte black per mil-spec.
  • Weight:1.6 oz.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!
  • NO QD SWIVEL INCLUDED