Shockwave TechnologiesShipping by weight
Add the sleek, sexy Shockwave Blade pistol stabilizer to your CZ Scorpion Evo 3 S1 pistol with added folding functionality by Lage MFG. This CZ Scorpion folding kit contains all the components needed:5
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade Stealth pistol stabilizer to your SIG MPX pistol. This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade Classic pistol stabilizer to your SIG MPX pistol. This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade 2M pistol stabilizer to your SIG MPX pistol. This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, sexy Shockwave Blade pistol stabilizer to your SIG MPX pistol with added folding functionality by Lage MFG.
This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade 2M pistol stabilizer to your SIG MPX pistol. This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade pistol stabilizer to your SIG MPX pistol. This kit contains all the components needed:
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade Stealth pistol stabilizer to your first-, second-, or third-gen full-size Glock. This kit contains all the components needed:
Compatible with Gen 1, Gen 2, and Gen 3 full-size Glocks: 17, 20, 21, 22, 24, 31, 34, 35, 37, and 18.
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade Classic pistol stabilizer to your first-, second-, or third-gen full-size Glock. This kit contains all the components needed:
Compatible with Gen 1, Gen 2, and Gen 3 full-size Glocks: 17, 20, 21, 22, 24, 31, 34, 35, 37, and 18.
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade 2M pistol stabilizer to your first-, second-, or third-gen full-size Glock. This kit contains all the components needed:
Compatible with Gen 1, Gen 2, and Gen 3 full-size Glocks: 17, 20, 21, 22, 24, 31, 34, 35, 37, and 18.
Thank you for your interest in our products.
Add the sleek, lightweight Shockwave Blade® pistol stabilizer to your first-, second-, or third-gen full-size Glock pistol. This Glock kit contains all the components needed:
Compatible with Gen 1, Gen 2, and Gen 3 full-size Glocks: 17, 20, 21, 22, 24, 31, 34, 35, 37, and 18.
Thank you for your interest in our products.
Help protect your hearing!* And do so without a $200 NFA tax stamp!
Introducing the newest Shockwave™ Technologies Flash Forward™ muzzle device–now for any 5.56mm firearm with a ½”-28 threaded muzzle. Its design redirects the expanding gases at the muzzle of your firearm away from you and toward the target. In testing, we have seen the peak decibel reading at the shooter’s ear reduced by an average of 10.1 db**. (As the decibel is logarithmic, this is a very noticeable difference.) However, because the overall sound level isn’t affected—just redirected—the Flash Forward isn’t considered an NFA item. It’s classified as a simple “threaded muzzle device.”
This hard-anodized, 6061-T6 aluminum “can” mounts directly to your ½”-28 threaded muzzle. No need for shims or crush washers, though you can still use them if you wish. For a semi-permanent installation, a bit of blue thread-locking compound works well.
Optionally, extend your pistol barrel to rifle length.
For a permanent installation, we offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a standard threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.
*Please note that OSHA’s “hearing safe” threshold is 140 dB. The Flash Forward is not an approved hearing-safe suppressor. Please always wear hearing protection, such as OSHA-approved ear plugs, earbuds, or over-the-ear earmuffs.
**Testing methodology: Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Winchester 5.56 NATO 55gr FMJ. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 2 mph. Altitude: 342 feet ASL. Humidity: 65 percent.
Help protect your hearing!* And do so without a $200 NFA tax stamp!
Introducing the newest Shockwave™ Technologies Flash Forward™ muzzle device–now for any 9mm firearm with a ½”-36 threaded muzzle. Its design redirects the expanding gases at the muzzle of your firearm away from you and toward the target. In testing, we have seen the peak decibel reading at the shooter’s ear reduced by an average of 9.4 db**. (As the decibel is logarithmic, this is a very noticeable difference.) However, because the overall sound level isn’t affected—just redirected—the Flash Forward isn’t considered an NFA item. It’s classified as a simple “threaded muzzle device.”
This hard-anodized, 6061-T6 aluminum “can” mounts directly to your ½”-36 threaded muzzle. No need for shims or crush washers, though you can still use them if you wish. For a semi-permanent installation, a bit of blue thread-locking compound works well.
Optionally, extend your pistol barrel to rifle length.
For a permanent installation, we offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.
*Please note that OSHA’s “hearing safe” threshold is 140 dB. The Flash Forward is not an approved hearing-safe suppressor. Please always wear hearing protection, such as OSHA-approved ear plugs, earbuds, or over-the-ear earmuffs.
**Testing methodology: Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Fiocchi 9mm 158-grain Subsonic Ammo. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 1 mph. Altitude: 342 feet ASL. Humidity: 65 percent.
Help protect your hearing!* And do so without a $200 NFA tax stamp!
Introducing the newest Shockwave™ Technologies Flash Forward™ muzzle device–now for any .30-caliber firearm with a 5/8”-24 threaded muzzle. Its design redirects the expanding gases at the muzzle of your firearm away from you and toward the target. In testing, we have seen the peak decibel reading at the shooter’s ear reduced by an average of 9.8 db**. (As the decibel is logarithmic, this is a very noticeable difference.) However, because the overall sound level isn’t affected—just redirected—the Flash Forward isn’t considered an NFA item. It’s classified as a simple “threaded muzzle device.”
This hard-anodized, 6061-T6 aluminum “can” mounts directly to your 5/8”-24 threaded muzzle. No need for shims or crush washers. For a semi-permanent installation, a bit of blue thread-locking compound works well.
Optionally, extend your pistol barrel to rifle length.
For a permanent installation, we offer an easy-to-use silver soldering kit. The silver solder we will offer has a melting point of 1,145 degrees. (ATF’s requirement is 1,100 degrees or more.) Contrary to what you may have heard, permanently attaching a muzzle device with silver solder really isn’t any more difficult than sweating copper tubing when doing plumbing. Given an overall length of 9.00” and assuming a threading interface of 0.625”, the Flash Forward lengthens your barrel by 8.375”. The 1.50” outer diameter fits under many popular handguards.
*Please note that OSHA’s “hearing safe” threshold is 140 dB. The Flash Forward is not an approved hearing-safe suppressor. Please always wear hearing protection, such as OSHA-approved ear plugs, earbuds, or over-the-ear earmuffs.
**Testing methodology: Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Hornady 190-Grain Sub-X 300 Blackout. Temperature: 72 degrees, sunny. Barometric pressure: 29.99 inches. Average wind speed: 1 mph. Altitude: 342 feet ASL. Humidity: 65 percent.
Help protect your hearing!* And do so without a $200 NFA tax stamp!
Introducing the newest Shockwave™ Technologies Flash Forward™ muzzle device–now for .22lr Ruger 10/22 firearms with factory unthreaded muzzles. Its design redirects the expanding gases at the muzzle of your firearm away from you and toward the target. In testing, we have seen the peak decibel reading at the shooter’s ear reduced by an average of 5.3 db**. (As the decibel is logarithmic, this is a noticeable difference.) However, because the overall sound level isn’t affected—just redirected—the Flash Forward isn’t considered an NFA item. It’s classified as a simple “muzzle device.”
This hard-anodized, 6061-T6 aluminum “can” mounts directly to your factory unthreaded muzzle. No need for adapters. For a semi-permanent installation, be sure to use the included roll pin.
Optionally, extend your pistol barrel to rifle length.
Given an overall length of 5.25” and an interface of 1.125”, the Flash Forward lengthens your barrel by 4.125”. The 1.00” outer diameter fits under many popular handguards.
*Please note that OSHA’s “hearing safe” threshold is 140 dB. The Flash Forward is not an approved hearing-safe suppressor. Please always wear hearing protection, such as OSHA-approved ear plugs, earbuds, or over-the-ear earmuffs.
**Testing methodology: Larson Davis SoundTrack LxT decibel meter microphone placed 0.15 meters left of the left ear. Muzzle, ear, and microphone all located 1.6 meters above ground. 10 shots were fired outdoors—and an average calculated. Ammo: Aguila .22lr Sniper Subsonic 60-grain ammo. Temperature: 72 degrees, sunny. Barometric pressure: 29.98 inches. Average wind speed: 2 mph. Altitude: 342 feet ASL. Humidity: 65 percent.
If you want to permanently affix your Flash Forward to your barrel in an ATF-approved manner, we have the parts and information you need to get the job done right.
Some may have heard that silver soldering isn’t easy. Without the right tools and supplies, that’s true. But with our kit and the right torch, you can accomplish it just about as easy as sweating a copper pipe joint.
What’s included in our “kit”:
Tools you’ll need to accomplish the task:
Instructions:
Once you’ve got all the pieces collected—firearm, Flash Forward, silver soldering kit, torch head, and gas—it’s time to “light this candle”!
**Firearm shown not included
Recent Comments